Application settings | Siemens CCIC1410 guide

Configuration with the CCIC1410 Homepage

9.13Application settings

This section explains how to configure the network camera to react in response to particular situations. A typical application is that when a motion is detected, the network camera sends buffered images to a FTP server or via e-mail as notifications.

1.Open the CCIC1410 Homepage (see chapter 9.1).

2.Choose the Configuration menu.

3.On the left hand side, choose the menu item Application.

4.Choose the desired settings.

5.Click Add or Delete.

In the illustration above, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is triggered, you can specify what kind of action will be performed. You can configure the network camera to send snapshots or videos to your email address or FTP site.

To configure an event, it is recommended to configure the server and media settings first so that the network camera will know what action shall be performed when a trigger is activated.

74

Siemens Building Technologies
Fire Safety & Security Products	05.2009

Image 74

Siemens CCIC1410 configurationmanual Application settings

Contents

Mjpeg / MPEG4 Contacting us About this documentTrademarks Training courses Contents 11.1 Installation of the device SafetyGeneral safety precautions Target readers Software Service and maintenanceCleaning of the device Meaning of the written warning notices Cmos characteristicsMeaning of the hazard symbols Damage due to improper storage of CD For CCIC1410-LAW Directives and standardsFor CCIC1410-L and CCIC1410-LA National restrictions Restrictions for France Declaration of conformity Specification CCIC1410-L Image system Technical dataDimensions Product specifications Electronics Network ConnectorPower supply Environment Package contents Ordering data Description of the equipment Versions of the camera Front and rear views of the camera Pin definitions of input/output only CCIC1410-LA, -LAW Connection method LED status Restore Hardware resetReboot Installation Network setup Internet connection via a router Internet connection with static IP Internet connection via PPPoE Point-to-Point over Ethernet CCIC1410 Installation Wizard Set up the CCIC1410 Installation Wizard CCIC1410 Installation Wizard Open the CCIC1410 Installation Wizard User interface of the CCIC1410 Installation Wizard Select a device for the configuration Refreshing the device list and linking to the devices System settingsOpen the system settings Change administrator password Change host name PPPoE setting Network settingsAdjust date and time LAN setting Dhcp or fixed IP Wireless Settings page appears Wireless settingMobile access Wireless mode Auth. Mode None Key length Key format Hexadecimal or Ascii Apply settings to selected device Access via Internet Access informationAccess from Home Access from Quicktime/Cellphone UPnP status Wireless statusNetwork type Ddns status Add to my favorite MPEG4 media options Client settingsStream options MPEG4 protocol options transmission modes UDP multicast 4 MP4 saving options storing destination and file nameUDP unicast File name prefix Add date and time suffix to the file name Using your Web Browser Configuration with the CCIC1410 HomepageUsing the CCIC1410 Installation Wizard Opening the CCIC1410 Homepage User interface of the CCIC1410 Homepage Tabs of the CCIC1410 Homepage Live video window of CCIC1410 Homepage with MPEG4 mode Live video window of the CCIC1410 Homepage Video and audio control buttons Digital zoom edit VolumeVolume at your local computer Start / Stop recording Live video window of CCIC1410 Homepage with Mjpeg mode Mjpeg protocol and media options System Settings for network cameraTurn off the LED indicator Host name name for the network camera Daylight saving time Disable privacy buttonTime zone of system system time Mark the checkbox Enable daylight saving time Option Description Digital input and digital output Add users Root passwordSecurity Manage users Network connection settings Network type PPPoE PPPoE Point-to-point protocol over Ethernet Enable UPnP portForwarding Primary stream port / Secondary stream port AuthenticationHttp Stream name 3 FTP Rtsp streaming Access name for stream 1 / Access name for stream Wireless LAN settings CCIC1410-LAW only Ssid Service Set Identifier TX rate Wireless modeChannel Security Default Key Network Key Security WEP Wired equivalent PrivacyAuthentication mode Key format Pre-shared Key WPA-PSKAlgorithm WPA2-PSK Enable Ddns Ddns settingsAccess list Provider Denied List section Allowed List and Denied ListDelete allowed list / Delete denied list Colour Audio and video settingsVideo settings Video orientation Power line frequencyImage Settings Maximum exposure time Privacy mask Video quality settings for stream 1 / stream Jpeg MPEG-4 Audio type Audio settingsInternal microphone input gain Motion detection settings Enable motion detection Application settings Event settings Event name Trigger Event Schedule Media Settings Media name Media Type Snapshot Video clip Server settings System log Server name Server Type Mail Remote log Alarm serverSystem log View parameters Current log Restore MaintenanceReboot Upload / export daylight saving time configuration file Export daylight saving time configuration file Configuration with the CCIC1410 Homepage Upload Daylight Saving Time Configuration File Using Rtsp players Accessing the video streamsVia the CCIC1410 Installation Wizard Via Internet Viewing Mjpeg streaming media Http//ipaddress80/ cgi-bin/liveimage Using 3GPP-compatible mobile devices Video Mode Using the CCIC1410 Installation Wizard Upgrade firmwareUsing the CCIC1410 Homepage Upgrade firmware Upgrade firmware Upgrade firmware Index Fixed ~Page A6V10236594