Siemens CCIC1410 configurationmanual Upload / export daylight saving time configuration file

Configuration with the CCIC1410 Homepage

1.Open the CCIC1410 Homepage (see chapter 9.1).

2.Choose the Configuration menu.

3.On the left hand side, choose the menu item Maintenance.

4.In the Restore section, mark/unmark the checkboxes for Network Type and Daylight saving time.

ÎNetwork Type:

Select this option to retain the Network Type settings. Please refer to chapter 9.7.1: Network type.

ÎDaylight saving time:

Select this option to retain the daylight saving time settings (see chapter 9.5.1: System.

If none of the options is selected, all settings will be reset to the factory default.

5.Click Restore.

Î The following message is displayed during the restoring process.

9.16.3Upload / export daylight saving time configuration file

This feature allows you to set the starting time and ending time of DST.

Export daylight saving time configuration file

1.Open the CCIC1410 Homepage (see chapter 9.1).

2.Choose the Configuration menu.

3.On the left hand side, choose the menu item Maintenance.

4.In the Export Daylight Saving Time Configuration File section, click Export to export an *.xml-file from the network camera.

5.Open the *.xml-file using Microsoft® Notepad and locate your time zone; set the starting time and ending time of the DST.

6.Click Save.

84

Siemens Building Technologies
Fire Safety & Security Products	05.2009