Installation
7.1.2Internet connection with static IP
Choose this connection type if you are required to use a static IP for the network camera and proceed as follows.
1.Set up the network camera in the LAN (see chapter 8.5.2).
2.Go to Configuration > Network > Network Type.
3.Select LAN > Use fixed IP address.
4.Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP.
7.1.3Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line (see chapter 8.5.1: PPPoE setting).
20
Siemens Building Technologies |
|
Fire Safety & Security Products | 05.2009 |
