Configuration with the CCIC1410 Homepage

Wireless mode:

Click on the pull-down menu to select from the following options:

zInfrastructure:

The network camera is connected to the WLAN via an Access Point (default setting).

zAd-Hoc:

The network camera is connected directly to a host equipped with a wireless adapter in a peer-to-peer environment.

Channel:

While in infrastructure mode, the channel is selected automatically to match the channel setting for the selected Access Point. In Ad-Hoc mode, the channel must be manually set to the same channel for each wireless adapter. The default channel setting depends on the regional settings.

TX rate:

This field is for selecting the maximum transmission rate on the network. The default setting is “Auto”, which means that the network camera will try to connect to the other wireless device at highest transmission rate.

Security:

Select the data encrypt method. There are four types from low to high: none, WEP,

WPA-PSK, and WPA2-PSK.

zSecurity: None: No data encryption.

60

Siemens Building Technologies

 

Fire Safety & Security Products

05.2009

Page 60
Image 60
Siemens CCIC1410 configurationmanual Wireless mode, Channel, TX rate, Security None No data encryption