Panasonic KX-TG2421NZ Other options, Dial lock, Handset key tone, Re-registering the handset

Page 31

Programmable Settings

Other options

Dial lock

This feature prohibits making outside calls. The default setting is OFF.

Important:

LWhen dial lock is turned on, only phone numbers stored in the phonebook as emergency numbers (numbers stored with a # at the beginning of the name) can be dialled using the phonebook (page 21). We recommend storing emergency numbers in the phonebook before using this feature.

LWhen dial lock is turned on, you cannot store, edit, or erase items in the phonebook.

To turn dial lock on

1Press {MENU}.

2Scroll to “Dial lock” by pressing {V} or {^}, then press {>}.

3Enter a 4-digit password.

LThis password is required when turning dial lock off. We recommend writing the password down.

4Press {Save}.

5Press {Yes}.

L“Dial lock on” will be displayed.

6Press {OFF}.

Note:

LIf dial lock is turned on, the handset displays “Dial lock”. While there are missed calls, “Dial lock” is not displayed when the handset is off the base unit.

To turn dial lock off

1Press {MENU}.

2Scroll to “Dial lock” by pressing {V} or {^}, then press {>}.

3Enter the same password that was entered when dial lock was turned on.

4Press {Save}.

5Press {Yes}.

L“Dial lock off” will be displayed.

6Press {OFF}.

Note:

LIf you forget the password, consult your nearest Panasonic service centre.

Handset key tone

You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones. The default setting is ON.

1Press {MENU}.

2Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.

3Scroll to “Key tone” by pressing {V} or {^}, then press {>}.

4Press {V} or {^} repeatedly to select “On” or “Off”.

5Press {Save}, then press {OFF}.

Re-registering the handset

If “No link to base. Move closer

to base, try again.” is displayed even when the handset is near the base unit, you may need to re-register the handset to the base unit.

Important:

LMake sure the base unit is not being used.

31

Image 31

Contents Model No. KX-TG2421NZ Charge the battery for 6 hours before initial useIntroduction Introduction Included accessories No. Accessory items Accessory informationInstallation Important safety instructionsMedical BatteryGeneral Warnings Environment For best performanceImportant notice Base unit location/noiseRoutine care Connections If you subscribe to an Adsl service Battery installationRecharging the battery Battery chargeBattery strength Battery icon Battery strengthBattery performance Battery replacementOperation Operating time Controls Controls and displayMicrophone Charge contacts Using the navigator key Ringer indicator Receiver DisplayDisplay KRecall CallL To adjust the speaker volumeMaking calls To dial after confirming the entered numberTemporary ringer off To make a call using the redial listAnswering calls Auto talkVoice enhancer Useful features during a callHold button Mute button=Phonebook G2=Booster on Pause button for PBX/long distance service usersFor Call Waiting service users Recall buttonBase unit Handset locatorHandset Adding items to the phonebook Using the phonebook=Name search dB=Scroll list Calling someone in the phonebookDuring an outside call, press Menu Chain dial featureEditing items in the phonebook Erasing items in the phonebookUsing toll services from Telecom or another company Using Caller ID serviceCaller ID features Example Jack Smith 310P 29JUN 0555333444 310P 29JUN Caller listViewing the caller list and calling back Missed Calls Rcvd Phone Kcalls Book LErasing a selected item Editing a caller’s phone number before calling backStoring caller information into the phonebook Erasing caller informationMain menu Sub-menu Guide to handset programmingHandset ringer tone Ringer settingsHandset ringer volume Ringer volume Low High KBack dB SaveLHandset LCD contrast Call optionsDisplay options Auto talkStoring your area code Telephone settingsLine mode Recall timeRe-registering the handset Other optionsDial lock Handset key toneBase unit Direct commands chart Programming via direct commandsFeature Feature code Setting code To connect an optional headset to the handset Belt clipHeadset optional To attach the belt clip To remove the belt clipWall mounting Fasten the AC adaptor cord Hooks To power outletDisplay message Cause & solution Error messagesGeneral use TroubleshootingProgrammable settings Problem Cause & solutionPhonebook Making/answering calls, PagingCaller ID Power failure Battery chargeBase unit Technical informationHandset Index Page Manufacturer