Panasonic KX-TCD952EB F42, Setting the Direct Call Mode, Dialling the Stored Number

Page 28

Direct Call

You can store a number in the direct call memory. This feature allows you to make a call easily by

pressing . Incoming calls are accepted.

Setting the Direct Call Mode

After storing the direct call number, the unit will automatically switch to the direct call mode. When the direct call mode is on, you can ONLY dial the number stored in the direct call memory.

1 Press PROG .

2Press G or F until “F42” is displayed.

3Press OK .

F42 -

•If the current stored number is the same as the number you wish to set, skip to step 5.

4Enter the phone number, up to 24 digits.

• If you misdial, press C . The digits are erased from the right. To erase all digits, press C firmly.

5 Press PROG .

•A confirmation tone sounds.

•The display will return to the stand-by mode, then “ ” is displayed.

-i -

To change the direct call number:

Enter the new direct call number in step 4.

To turn OFF the direct call mode

1 Press PROG .

2Press G or F until “F42” is displayed.

3Press OK .

4Press PROG .

•“ ” will go out.

Dialling the Stored Number

Make sure that “ ” is displayed, then press .

•The number stored in the direct call memory is dialled automatically.

•When the handset is in “direct call”mode emergency calls can not be made until direct call is cancelled.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Operating Instructions Charge the batteries for about 4 hours before initial useImportant Information This apparatus may make use of the following facilitiesPage Before Initial Use Model No DescriptionFor Best Performance Battery ChargeBase Unit Location Contents Selecting the Stand-by Mode Correct Use and ChargingBase unit Location of ControlsHandset Settings Installing the Batteries in the HandsetDisplay IconsSettings Connections Hooks To Mains Outlet AC 230-240V, 50 HzTelephone Line Cord USE only with Panasonic AC Adaptor KX-TCA9E or KX-TCA11EBattery strength Battery informationFully charged Medium Low Recharge WhenSettings Turning the Power on Display Power Button PWRPress PWR firmly Current connected base unit number is displayedSelecting the Dialling Mode Press Prog then INT Enter the base unit passwordEnsure that the dialling mode is selected tone PressSettings Selecting the Handset Ringer Volume/Pattern Ringer volumeF23U Ringer patternSelecting the Base Unit Ringer Volume Setting the Auto Talk Feature22u2 F28u0To select the receiver volume Making CallsI2345678 888800 00Answering Calls To redial the last number dialledTo redial after confirming the numbers in redial memory To turn the handset ringer off temporarilyCaller ID Service How caller information is displayed when a call is receivedNot provide a Caller ID service, the display will show Checking the number of new callsUsing the Caller List 345Viewing the Caller List To exit the list, press C0i2345678 Using the Caller List Calling Back from the Caller ListEditing the Caller’s Phone Number Clearing a Caller’s Phone Number in the Caller List You can clear caller’s phone numbers in the Caller ListPress Prog Press and hold C Confirmation tone soundsSpeed Dialling Storing Phone Numbers in MemoryDialling a Stored Number To erase a stored numberSpecial Features How to Use the Pause FeatureSetting the pause timing 33uSpecial Features Temporary Tone Dialling Setting the Key LockFor Rotary or Pulse Service Users To cancel the key lockUsing the Recall Feature Selecting the earth option/time break recall mode32u To accept the waiting call and hang up the existing callSummary of Programmable Functions Setting the Password F5oF5o - - o 5o - - oSetting the Direct Call Mode To turn OFF the direct call modeDirect Call F42To turn OFF the call prohibition mode Call ProhibitionF4 Io F4 IO0To cancel the call restricted handsets To cancel the call restriction numbersWhen you dial a restricted number Call RestrictionOther Programmable Settings F2 iUF25U0 F26UOther Programmable Settings Selecting the Talk Mode Display Press G or F to select to select the desired settingF32U During a conversation, the display will be as followsClearing the Settings in Memory FunctionOperating More than One Handset For Optional Multi-Unit UsersOperating More than One Base Unit Registration F7 iUF7 io Registering a Handset in the Base UnitRegistration Selecting the Base Unit Access Automatic base unit accessSpecified base unit access I000Cancelling a Handset Cancelling a base unitEnter the handset numbers you want to cancel Press OK Enter the handset password pSelecting the Stand-by Mode Display Bell SelectionF3 i0 Iu2Iu3 I03 i23456Selecting first handset Selecting all handsetsPaging/Intercom 888800 00 0Paging All Handsets from the Base Unit Intercom between HandsetsTransferring a Call from One Handset to Another Transferring a call using the intercomTransferring a call without the intercom Setting the Call Waiting Tone F24UPaging/Intercom Conference Press Prog Press G or F until F24 is displayed Press OKSelecting the battery type Battery replacementReplacing the Batteries Press Prog Press G or F until F33 is displayed Press OKReplacing the Batteries Using the Belt ClipTo remove the belt clip Before Requesting Help Problem RemedyUnit does not work Before Requesting Help Correctly You cannot register the handset in the base unitSeconds You charged the batteries fully, but Safety Instructions SafetyInstallations Environment PlacementAdding Another Phone Term Definitions Panasonic Business Systems U.K Receipt No Date of PurchaseModel No. KX-TCD952EB Serial NoManufacturer Manufacturers DeclarationPQQX12707ZA WU0300NR0

KX-TCD952EB specifications

The Panasonic KX-TCD952EB is a cordless telephone that stands out for its blend of advanced technology, user-friendly features, and elegant design. Specifically engineered for clarity in communication, it brings together functionalities that cater to both personal and professional needs.

One of the main features of the KX-TCD952EB is its DECT (Digital Enhanced Cordless Telecommunications) technology. This ensures that calls made with the device are not only clear but also secure, minimizing the likelihood of interference. The DECT technology provides a maximum range of up to 300 meters in open areas, allowing users to move freely without sacrificing call quality.

The KX-TCD952EB is equipped with an impressive alphanumeric display that offers a clear view of incoming calls and phonebook entries. Its phonebook capacity can handle up to 100 contacts, allowing users to store important numbers for quick access. The built-in caller ID functionality ensures that callers can be identified before the phone is answered, enhancing convenience and security.

Another notable aspect of this model is its answering machine feature. With the ability to record up to 18 minutes of messages, users can ensure that no important communications are missed. The answering machine is straightforward to use, with remote access capabilities that allow users to listen to messages from anywhere.

The KX-TCD952EB also includes features such as a redial function and a speakerphone that enhances hands-free communication. It boasts a long battery life, with an estimated talk time of up to 10 hours and standby time of up to 8 days, which is particularly beneficial for those who need to stay connected over extended periods. The device is also designed to be energy-efficient, contributing to lower energy consumption.

In terms of design, the Panasonic KX-TCD952EB features a sleek and modern aesthetic, making it a stylish addition to any home or office. It is lightweight and ergonomically designed for comfortable handling, featuring large buttons for easy dialing.

Overall, the Panasonic KX-TCD952EB combines reliable technology with practical features, making it an excellent choice for anyone in need of a dependable cordless phone. Whether for personal use or in a small business setting, this telephone model addresses various communication needs with efficiency and style.
Top Page Image Contents