Panasonic KX-TCD952EB Replacing the Batteries, Selecting the battery type, Battery replacement

Page 43

Replacing the Batteries

Selecting the battery type

Three Nickel cadmium (Ni-Cd) batteries are included with this unit. Nickel metal hydride (Ni-MH) rechargeable batteries can also be used. If you replace the batteries with Ni-MH batteries, you must set the battery type selection to “1”, or the battery strength will not be displayed correctly. The factory preset is “0”(Ni-Cd).

1 Press PROG .

2Press G or F until “F33” is displayed.

3Press OK .

4

To select Ni-MH batteries, press

1 .

 

OR

 

 

To select Ni-Cd batteries, press

0 .

5

Press PROG .

 

A confirmation tone sunds and the display will return to the stand-by mode.

Incorrect battery type selection may shorten battery life.

Battery replacement

If “ ” flashes after a few telephone calls even when the handset batteries have been fully charged, it is time to replace the batteries with new ones. Remember to charge the new batteries after replacement.

1Turn the power OFF to prevent memory loss (p. 12).

Remove the cover by sliding while pressing in the direction of the arrow, then take out the batteries.

2 Replace the batteries with new ones as shown.

When you finish, close the handset cover and turn

the power ON (p. 12).

3 Be sure to charge the new batteries fully in order to display the battery icon correctly (p. 11).

Ni-Cd battery: For about 4 hours.

Ni-MH battery: For about 8 hours.

Discard defective batteries as soon as possible. Defective batteries may leak into the unit.

Please use only Panasonic P-03H or P-P03S batteries.

If the rechargeable batteries are not inserted correctly, the handset will not work.

Nickel metal hydride (Ni-MH) rechargeable batteries (AAA size) are available. Please use only Panasonic HHR-P03H batteries.

Please return the rechargeable batteries to your sales shop at the end of their useful life.

Useful Information Chapter 5

43

Image 43
Contents Charge the batteries for about 4 hours before initial use Operating InstructionsThis apparatus may make use of the following facilities Important InformationPage Model No Description Before Initial UseFor Best Performance Battery ChargeBase Unit Location Contents Correct Use and Charging Selecting the Stand-by ModeBase unit Location of ControlsHandset Icons SettingsInstalling the Batteries in the Handset DisplayUSE only with Panasonic AC Adaptor KX-TCA9E or KX-TCA11E Settings ConnectionsHooks To Mains Outlet AC 230-240V, 50 Hz Telephone Line CordRecharge When Battery strengthBattery information Fully charged Medium LowCurrent connected base unit number is displayed Settings Turning the Power onDisplay Power Button PWR Press PWR firmlyPress Selecting the Dialling ModePress Prog then INT Enter the base unit password Ensure that the dialling mode is selected toneRinger pattern Settings Selecting the Handset Ringer Volume/PatternRinger volume F23UF28u0 Selecting the Base Unit Ringer VolumeSetting the Auto Talk Feature 22u2888800 00 To select the receiver volumeMaking Calls I2345678To turn the handset ringer off temporarily Answering CallsTo redial the last number dialled To redial after confirming the numbers in redial memoryChecking the number of new calls Caller ID ServiceHow caller information is displayed when a call is received Not provide a Caller ID service, the display will showTo exit the list, press C Using the Caller List345 Viewing the Caller List0i2345678 Using the Caller List Calling Back from the Caller ListEditing the Caller’s Phone Number Confirmation tone sounds Clearing a Caller’s Phone Number in the Caller ListYou can clear caller’s phone numbers in the Caller List Press Prog Press and hold CTo erase a stored number Speed DiallingStoring Phone Numbers in Memory Dialling a Stored Number33u Special FeaturesHow to Use the Pause Feature Setting the pause timingTo cancel the key lock Special Features Temporary Tone DiallingSetting the Key Lock For Rotary or Pulse Service UsersTo accept the waiting call and hang up the existing call Using the Recall FeatureSelecting the earth option/time break recall mode 32uSummary of Programmable Functions 5o - - o Setting the PasswordF5o F5o - - oF42 Setting the Direct Call ModeTo turn OFF the direct call mode Direct CallF4 IO0 To turn OFF the call prohibition modeCall Prohibition F4 IoCall Restriction To cancel the call restricted handsetsTo cancel the call restriction numbers When you dial a restricted numberF26U Other Programmable SettingsF2 iU F25U0During a conversation, the display will be as follows Other Programmable Settings Selecting the Talk Mode DisplayPress G or F to select to select the desired setting F32UFunction Clearing the Settings in MemoryOperating More than One Handset For Optional Multi-Unit UsersOperating More than One Base Unit Registering a Handset in the Base Unit RegistrationF7 iU F7 ioI000 Registration Selecting the Base Unit AccessAutomatic base unit access Specified base unit accessPress OK Enter the handset password p Cancelling a HandsetCancelling a base unit Enter the handset numbers you want to cancelIu2 Selecting the Stand-by Mode DisplayBell Selection F3 i0Selecting all handsets Iu3I03 i23456 Selecting first handsetIntercom between Handsets Paging/Intercom888800 00 0 Paging All Handsets from the Base UnitTransferring a Call from One Handset to Another Transferring a call using the intercomTransferring a call without the intercom Press Prog Press G or F until F24 is displayed Press OK Setting the Call Waiting ToneF24U Paging/Intercom ConferencePress Prog Press G or F until F33 is displayed Press OK Selecting the battery typeBattery replacement Replacing the BatteriesReplacing the Batteries Using the Belt ClipTo remove the belt clip Before Requesting Help Problem RemedyUnit does not work Before Requesting Help Correctly You cannot register the handset in the base unitSeconds You charged the batteries fully, but Placement Safety InstructionsSafety Installations EnvironmentAdding Another Phone Term Definitions Serial No Panasonic Business Systems U.KReceipt No Date of Purchase Model No. KX-TCD952EBManufacturer Manufacturers DeclarationPQQX12707ZA WU0300NR0

KX-TCD952EB specifications

The Panasonic KX-TCD952EB is a cordless telephone that stands out for its blend of advanced technology, user-friendly features, and elegant design. Specifically engineered for clarity in communication, it brings together functionalities that cater to both personal and professional needs.

One of the main features of the KX-TCD952EB is its DECT (Digital Enhanced Cordless Telecommunications) technology. This ensures that calls made with the device are not only clear but also secure, minimizing the likelihood of interference. The DECT technology provides a maximum range of up to 300 meters in open areas, allowing users to move freely without sacrificing call quality.

The KX-TCD952EB is equipped with an impressive alphanumeric display that offers a clear view of incoming calls and phonebook entries. Its phonebook capacity can handle up to 100 contacts, allowing users to store important numbers for quick access. The built-in caller ID functionality ensures that callers can be identified before the phone is answered, enhancing convenience and security.

Another notable aspect of this model is its answering machine feature. With the ability to record up to 18 minutes of messages, users can ensure that no important communications are missed. The answering machine is straightforward to use, with remote access capabilities that allow users to listen to messages from anywhere.

The KX-TCD952EB also includes features such as a redial function and a speakerphone that enhances hands-free communication. It boasts a long battery life, with an estimated talk time of up to 10 hours and standby time of up to 8 days, which is particularly beneficial for those who need to stay connected over extended periods. The device is also designed to be energy-efficient, contributing to lower energy consumption.

In terms of design, the Panasonic KX-TCD952EB features a sleek and modern aesthetic, making it a stylish addition to any home or office. It is lightweight and ergonomically designed for comfortable handling, featuring large buttons for easy dialing.

Overall, the Panasonic KX-TCD952EB combines reliable technology with practical features, making it an excellent choice for anyone in need of a dependable cordless phone. Whether for personal use or in a small business setting, this telephone model addresses various communication needs with efficiency and style.