Panasonic KX-TCD952EB F23U, Settings Selecting the Handset Ringer Volume/Pattern, Ringer volume

Page 14

Settings

Selecting the Handset Ringer Volume/Pattern

You can program the desired handset ringer volume and pattern.

Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.

Ringer volume

7 levels are available. The lowest level is 1. The highest level is 6. The factory preset is 3. When set to OFF, the handset will not ring.

1 Press PROG .

F iU

2Press G or F until “F22 ” is displayed.

3Press OK .

•The current volume is displayed and rings. Ex. Level 3 is selected.

4Press G or F to select the desired level.

•Each time you press a button, the selected volume is displayed and rings.

•To set to OFF, erase “ ” by pressing G

until “

” is displayed.

5 Press PROG .

•A confirmation tone sounds and the display will return to the stand-by mode.

•When set to OFF, “ ” will be displayed.

Ringer pattern

You can program the desired handset ringer pattern (6 patterns). The factory preset is pattern 1.

1 Press PROG .

2Press G or F until “F23 ” is displayed.

3Press OK .

•The current ringer pattern is displayed and rings.

Ex. Pattern 1 is selected.

F23U i

4Press G or F to select the desired pattern.

•You can press 1 to 6 to select the pattern.

•Each time you press a button, the selected pattern will be displayed and sound.

5Press PROG .

•A confirmation tone sounds and the display will return to the stand-by mode.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operating Instructions Charge the batteries for about 4 hours before initial useImportant Information This apparatus may make use of the following facilitiesPage Before Initial Use Model No DescriptionBase Unit Location Battery ChargeFor Best Performance Contents Selecting the Stand-by Mode Correct Use and ChargingHandset Location of ControlsBase unit Display SettingsInstalling the Batteries in the Handset IconsTelephone Line Cord Settings ConnectionsHooks To Mains Outlet AC 230-240V, 50 Hz USE only with Panasonic AC Adaptor KX-TCA9E or KX-TCA11EFully charged Medium Low Battery strengthBattery information Recharge WhenPress PWR firmly Settings Turning the Power onDisplay Power Button PWR Current connected base unit number is displayedEnsure that the dialling mode is selected tone Selecting the Dialling ModePress Prog then INT Enter the base unit password PressF23U Settings Selecting the Handset Ringer Volume/PatternRinger volume Ringer pattern22u2 Selecting the Base Unit Ringer VolumeSetting the Auto Talk Feature F28u0I2345678 To select the receiver volumeMaking Calls 888800 00To redial after confirming the numbers in redial memory Answering CallsTo redial the last number dialled To turn the handset ringer off temporarilyNot provide a Caller ID service, the display will show Caller ID ServiceHow caller information is displayed when a call is received Checking the number of new callsViewing the Caller List Using the Caller List345 To exit the list, press CEditing the Caller’s Phone Number Using the Caller List Calling Back from the Caller List0i2345678 Press Prog Press and hold C Clearing a Caller’s Phone Number in the Caller ListYou can clear caller’s phone numbers in the Caller List Confirmation tone soundsDialling a Stored Number Speed DiallingStoring Phone Numbers in Memory To erase a stored numberSetting the pause timing Special FeaturesHow to Use the Pause Feature 33uFor Rotary or Pulse Service Users Special Features Temporary Tone DiallingSetting the Key Lock To cancel the key lock32u Using the Recall FeatureSelecting the earth option/time break recall mode To accept the waiting call and hang up the existing callSummary of Programmable Functions F5o - - o Setting the PasswordF5o 5o - - oDirect Call Setting the Direct Call ModeTo turn OFF the direct call mode F42F4 Io To turn OFF the call prohibition modeCall Prohibition F4 IO0When you dial a restricted number To cancel the call restricted handsetsTo cancel the call restriction numbers Call RestrictionF25U0 Other Programmable SettingsF2 iU F26UF32U Other Programmable Settings Selecting the Talk Mode DisplayPress G or F to select to select the desired setting During a conversation, the display will be as followsClearing the Settings in Memory FunctionOperating More than One Base Unit For Optional Multi-Unit UsersOperating More than One Handset F7 io RegistrationF7 iU Registering a Handset in the Base UnitSpecified base unit access Registration Selecting the Base Unit AccessAutomatic base unit access I000Enter the handset numbers you want to cancel Cancelling a HandsetCancelling a base unit Press OK Enter the handset password pF3 i0 Selecting the Stand-by Mode DisplayBell Selection Iu2Selecting first handset Iu3I03 i23456 Selecting all handsetsPaging All Handsets from the Base Unit Paging/Intercom888800 00 0 Intercom between HandsetsTransferring a call without the intercom Transferring a call using the intercomTransferring a Call from One Handset to Another Paging/Intercom Conference Setting the Call Waiting ToneF24U Press Prog Press G or F until F24 is displayed Press OKReplacing the Batteries Selecting the battery typeBattery replacement Press Prog Press G or F until F33 is displayed Press OKTo remove the belt clip Using the Belt ClipReplacing the Batteries Unit does not work Problem RemedyBefore Requesting Help Before Requesting Help Seconds You charged the batteries fully, but You cannot register the handset in the base unitCorrectly Installations Environment Safety InstructionsSafety PlacementAdding Another Phone Term Definitions Model No. KX-TCD952EB Panasonic Business Systems U.KReceipt No Date of Purchase Serial NoPQQX12707ZA WU0300NR0 Manufacturers DeclarationManufacturer

KX-TCD952EB specifications

The Panasonic KX-TCD952EB is a cordless telephone that stands out for its blend of advanced technology, user-friendly features, and elegant design. Specifically engineered for clarity in communication, it brings together functionalities that cater to both personal and professional needs.

One of the main features of the KX-TCD952EB is its DECT (Digital Enhanced Cordless Telecommunications) technology. This ensures that calls made with the device are not only clear but also secure, minimizing the likelihood of interference. The DECT technology provides a maximum range of up to 300 meters in open areas, allowing users to move freely without sacrificing call quality.

The KX-TCD952EB is equipped with an impressive alphanumeric display that offers a clear view of incoming calls and phonebook entries. Its phonebook capacity can handle up to 100 contacts, allowing users to store important numbers for quick access. The built-in caller ID functionality ensures that callers can be identified before the phone is answered, enhancing convenience and security.

Another notable aspect of this model is its answering machine feature. With the ability to record up to 18 minutes of messages, users can ensure that no important communications are missed. The answering machine is straightforward to use, with remote access capabilities that allow users to listen to messages from anywhere.

The KX-TCD952EB also includes features such as a redial function and a speakerphone that enhances hands-free communication. It boasts a long battery life, with an estimated talk time of up to 10 hours and standby time of up to 8 days, which is particularly beneficial for those who need to stay connected over extended periods. The device is also designed to be energy-efficient, contributing to lower energy consumption.

In terms of design, the Panasonic KX-TCD952EB features a sleek and modern aesthetic, making it a stylish addition to any home or office. It is lightweight and ergonomically designed for comfortable handling, featuring large buttons for easy dialing.

Overall, the Panasonic KX-TCD952EB combines reliable technology with practical features, making it an excellent choice for anyone in need of a dependable cordless phone. Whether for personal use or in a small business setting, this telephone model addresses various communication needs with efficiency and style.
Top Page Image Contents