Using Bluetooth Devices
Answering landline calls with your headset
To answer a landline call, turn on your headset referring to your headset operating instructions.
When you finish talking, turn off your headset referring to your headset operating instructions.
Note:
R If you cannot hang up the call using your headset;
–press MnN (STOP) on the base unit.
–press
Switching between the base unit and your headset
You can switch between the base unit and your headset:
–during a landline call with the base unit speakerphone.
–during an intercom call between the base unit and handset.
–while listening to messages recorded on the base unit answering system.*1
n
Press MHEADSETN on the base unit.
To switch to the base unit:
Press MSP-PHONEN on the base unit. *1 KX-TG7621 series: page 3
R You can only switch from the base unit to your headset. Turn on the headset referring to your headset operating instructions.
Call sharing between your headset and the handset
Important:
R To activate this feature, you should set call sharing mode to on beforehand (page 44).
n While the handset is on a landline call:
To join the conversation with your headset, turn on the headset referring to your headset operating instructions.
n While your headset is on a landline call:
To join the conversation with the handset, press MN.
Adjusting your headset receiver volume
Base unit
n
n
56For assistance, please visit http://www.panasonic.com/help