Panasonic KX-TG8511BX operating instructions Error messages

TG8511_19BX(e).book Page 40 Thursday, July 8, 2010 5:44 PM

Useful Information

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message	Cause/solution
Base no power	L The handset has lost communication with the base
or	unit. Move closer to the base unit and try again.
No link to base.	L Unplug the base unit’s AC adaptor to reset the unit.
Reconnect main	Reconnect the adaptor and try again.
base AC adaptor.	L The handset’s registration may have been cancelled.
	Re-register the handset (page 29).
Check Phone Line	L The supplied telephone line cord has not been
	connected yet or not connected properly. Check the
	connections (page 8).
Invalid Number	L You tried to send an SMS message to a phone number
	saved in the phonebook, caller list, or redial list that is
	over 20 digits long.
Memory Full	L The phonebook memory is full. Erase unwanted
	entries (page 19).
	L The call barred list memory is full. Erase unwanted
	entries (page 28).
	L The maximum number of base units (4) is already
	registered to the handset. Cancel unused base unit
	registrations from the handset (page 30).
Use rechargeable	L A wrong type of battery such as Alkaline or
battery.	Manganese was inserted. Use only the rechargeable
	Ni-MH batteries noted on page 4, 6.
You must first	L You must subscribe to a Caller ID service. Once you
subscribe to	receive caller information after subscribing to a Caller
Caller ID.	ID service, this message will not be displayed.

40