Panasonic KX-TG8511BX operating instructions Base unit’s AC adaptor is not properly connected

TG8511_19BX(e).book Page 43 Thursday, July 8, 2010 5:44 PM

	Useful Information
Making/answering calls
Problem	Cause/solution
_is displayed.	L The handset is too far from the base unit. Move closer.
	L The base unit’s AC adaptor is not properly connected.
	Reconnect AC adaptor to the base unit.
	L The handset is not registered to the base unit. Register
	it (page 29).
	L Activating one touch eco mode reduces the range of
	the base unit in standby mode. If required, turn eco
	mode off (page 13).
Noise is heard, sound	L You are using the handset or base unit in an area with
cuts in and out.	high electrical interference. Re-position the base unit
	and use the handset away from sources of
	interference.
	L Move closer to the base unit.
	L If you use a DSL/ADSL service, we recommend
	connecting a DSL/ADSL filter between the base unit
	and the telephone line jack. Contact your DSL/ADSL
	provider for details.
	L Unplug the base unit’s AC adaptor to reset the unit and
	turn off the handset. Reconnect the adaptor, turn on
	the handset and try again.
The handset does not	L The ringer volume is turned off. Adjust ringer volume
ring.	(page 23).
	L Night mode is turned on. Turn it off (page 26).
I cannot make a call.	L The dialling mode may be set incorrectly. Change the
	setting (page 13).
	L The handset is too far from the base unit. Move closer
	and try again.
	L Another unit is in use. Wait and try again later.
	L You dialled a call restricted number (page 28).
	L The key lock feature is turned on. Turn it off (page 17).

43