Panasonic KX-TC1851NZB, KX-TC1851ALB operating instructions Service difficulties

Page 59

If you are satisﬁed with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed.

You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socket will need to be installed.

Should the Permitted Attachment not operate when plugged into a socket, it is either faulty or unsuitable for operation with your telephone service. It should be returned to the store where purchased.

Service difficulties

If at any time a fault occurs on your telephone service carry out the following checks before you call for service:

³Disconnect the Permitted Attachment and try using the service with the normal telephone.

³If the telephone service then operates satisfactorily, the fault is in your Permitted Attachment. Leave the Permitted Attachment disconnected and report the fault to its supplier or agent to arrange for repair.

³If when using the telephone the service is still faulty, report the fault to “Service Difficulties and Faults” for attention.

You are required to keep this Permitted Attachment in good working order while it is connected to your telephone service. Its construction or internal circuit must not be modiﬁed in any way without permission.

WARNING

This cordless telephone system does not incorporate provision for secrecy of conversations. Appropriately tuned radio equipment and other cordless telephone systems in close proximity may be used by a third party to monitor and possibly interrupt conversations in progress when this system is on radio operation.

Useful Information

59

Image 59

Contents KX-TC1851NZB Charge the battery for about 6 hours before initial useFor your future reference Accessories includedBefore Initial Use Base Unit Location/Noise Battery ChargeFor Best Performance Contents Useful Information Handset Location of ControlsAntenna p Charge Contacts p USE/CHARGE Indicator pCaller ID Indicator p , 20 Base unitTalk 01-06-35 DisplayDirectory key Waiting 0266667777Connections SettingsFully charged Medium Low ﬂashing Needs to be recharged Installing the Battery in the HandsetBattery strength Display prompt Battery strengthRecharge Battery informationAfter your Panasonic battery is fully charged p Operation Approx. battery lifeMake sure the handset is in the standby mode Selecting the Line ModeDuring programming Programmable FunctionsProgram Press Ý or Ü to select On or Off Setting the Auto Talk FeaturePoints to Talk switching Ringer Selecting the Ringer VolumeRinger volume Save directory 1Ringer volume 43 1=YesTalk Making CallsIf noise interferes with the conversation To redial the last number dialledLoud To select the receiver volumeTo dial after conﬁrming the entered number To redial after conﬁrming the last number dialledBacklit handset keypad Answering CallsAuto Talk Backlit LCD displayDisplay shows the caller’s phone number after the ﬁrst ring Caller ID ServiceHow caller information is displayed when a call is received Private name displayNew calls 43 1=Directory To check the number of new callsWhile the handset is on the base unit While the handset is off the base unitTo check who has called, follow the steps below Using the Caller ListViewing the Caller List Display meaning Ex. When you search from the most recent callTo return to the previous caller To exit the Caller List, pressDesired caller Calling Back from the Caller ListOr Ü to enter the Caller List Press Ý or Ü repeatedly to ﬁndFor New Zealand Users 00276543210 =Next 1=Edit Editing the Caller’s Phone Number76543210 =Next 1=Edit 0276543210 =Next 1=EditAdvanced Operation Edit 1Save directory 43 1=Yes Enter name 21 4=Next Storing Caller List Information in the DirectoryNew calls 43 1=Directory 0246813579 1220A JAN.12 √ Clear Erasing Caller List InformationTo erase a speciﬁc caller from the Caller List New call 43 1=Directory Exit 1All clear 43 1=Yes To erase all entries in the Caller List1234567890123456 =Edit 1=Save Save DIRECT# One-Touch DiallerStoring a Phone Number in the Direct Button Press Ý Next keyTalk 1234567890123456 00-00-00 Dialling the Stored Number in the Direct ButtonStoring Names and Numbers in the Directory Using the DirectoryPress Ý Next key Press FWD/EDIT ß Save key 1Save directory Ringer volume 43 1=Yes Directory= 20 itemsPress Ý Next key Enter a phone number, up to 22 digits For New Zealand Users Number of times key is pressed Keys Steps for Entering Names and SymbolsIf you make a mistake while entering a name For example, to enter Tom Jones 0312345678 Finding Items in the DirectoryDirectory list =Caller’s list Frank Talk Dialling from the DirectoryIndex Table Keys IndexEditing an Item in the Directory Press Clear Press FWD/EDIT ß Yes key or Clear Erasing an Item from the DirectoryDirectory item you want to erase p HelenTo stop paging, press HANDSET\LOCATOR again or press Talk Special FeaturesAutomatic Security Code Setting Handset LocatorCall Waiting and Caller ID Compatible How to Use the Pause ButtonFor Analog PBX Line/Long Distance Service Users For Call Waiting Service Users in New Zealand1Program 43 1=Yes Recall ButtonSelecting the recall time Save DIRECT# 1Set recall time 43 1=Yes Points to Set recall timePress Ý or Ü repeatedly until Desired time is displayedWall mounting adaptor, then Wall MountingWall Template Tuck the telephone line cord insideHandset holder as shown To charge the batteryTo remove the handset holder Place the handset onTo attach the belt clip To remove the belt clip Using the Belt ClipUsing the Optional Headset Connecting the optional headset to the handsetBattery Replacement Adding Another Phone Clearer channel Problem Cause and RemedyBefore Requesting Help Before Requesting Help Recharge battery is For New Zealand Customers Placement Safety InstructionsSafety Installations EnvironmentMedical Safety InstructionsFor New Zealand Users Only Instructions to customer InstallationImportant Information For Australia only Service difficulties PQQX12869YA-BM FM0800HK1090 D 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan