Panasonic kX-TG2323C operating instructions Important Information

Page 37

TG2323C.fm Page 37 Friday, February 20, 2004 10:59 AM

Important Information

NOTICE:

This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, “IC:”, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.

And, the term “IC:” signifies that Industry Canada radio technical specifications were met.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.

Users should ensure, for their own protection, that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

Caution:

Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.

NOTICE:

The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.

The Ringer Equivalence Number (REN) of This Unit: (found on the bottom of the unit).

NOTICE:

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Privacy of communications may not be ensured when using this telephone.

Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near, or on top of, a TV or VCR. If interference is experienced, move the cordless telephone further away from the TV or VCR. This will often reduce, or eliminate, interference.

Operating near 2.4 GHz electrical appliances may cause interference. Move away from the electrical appliances.

37

Useful Information

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Operating Instructions Charge the battery for 6 hours before initial useAccessories included For Best Performance Battery ChargeBase Unit Location/Noise Contents Contents Handset Location of ControlsRedial Button Base unit Location of ControlsBase unit display Connections InstallationTo replace the battery Installation Installing the Battery in the HandsetBattery information InstallationBattery replacement RechargeProgrammable Functions Handset Programmable SettingsPress Voice Enhancer Time and Day Handset Programmable Settings Voice Guidance Language HandsetDialing Mode Handset Programmable SettingsTo confirm the time and day, press Voice Enhancer then Ringer Tone Handset Programmable Settings Ringer Volume HandsetTo turn the ringer on, press d or B Temporary ringer offGreeting Message Base Unit Preparing the Answering SystemTo record a greeting message To review the greeting Preparing the Answering SystemTo erase the greeting Pre-recorded greetingRemote Code Handset Preparing the Answering System Number of Rings HandsetToll saver Enter a 2-digit remote code Press Voice EnhancerTo have a hands-free phone conversation Making CallsOFF Redial d, B Press SP-PHONEMaking Calls To adjust the receiver/speaker volume during a conversationTo redial the last number dialed Voice Enhancer TechnologyOFF SP-PHONE Answering CallsFor Call Waiting Service Users Handset Special FeaturesHandset Locator Base Unit Temporary Tone DialingHandset Press and hold Handset LocatorAutomatic Answering Operation Setting the Unit to Answer Calls Base UnitTo turn the incoming call monitoring feature off To play back messages Base Unit Listening to MessagesDuring playback Erasing a specific message Erasing MessagesErasing all messages Summary of remote operation Remote Operation from a Touch Tone PhoneAnswering System Remote Operation from a Touch Tone Phone Voice MenuTo turn on the Answering System Direct commandsSkipping the greeting Wall Mounting Shoulder Rest Attachment Belt ClipTo attach the belt clip To remove the belt clip To attach the shoulder rest attachmentOptional Headset Connecting an optional headsetProblem Cause & Remedy TroubleshootingTelephone System Voice Enhancer again Answering SystemGeneral TroubleshootingImportant Information Safety Instructions Safety Instructions SpecificationsPQQX14047ZA S0204-0 Panasonic Canada Inc
Top Page Image Contents