Answering transferred calls
Press {C} to answer the page.
LAfter the paging party disconnects, you can talk to the outside caller.
Registering a handset
The included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset.
For models with only 1 handset included
1 Handset:
{MENU} i{0}{0}
2 Base unit:
Press and hold {LOCATOR/ INTERCOM} until the CHARGE indicator flashes.
LAfter the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute.
3 Handset:
Press {OK}, then wait until the handset beeps.
For models with 2 or more handsets included
Important:
LIf you accidentally assign another handset’s extension number to the base unit, the originally assigned handset stops functioning. Confirm the extension number of the handset by placing it on the base unit or charger. Lift the handset from the charger before registering.
1 Handset:
{MENU} i{0}{0}
2 Base unit:
Press {SELECT} until the desired extension number (H1, H2, H3, or H4) is displayed on the base unit, then press and hold {CALL} until the CHARGE indicator flashes.
LH4 can be used if you have 4 handsets.
LAfter the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute.
3 Handset:
Press {OK}, then wait until the handset beeps.
Registering an additional handset
See page 6 for information on the available models and extension numbers.
Start from step 2.
46For assistance, please visit http://www.panasonic.com/phonehelp