Panasonic KX-NT343/KX-NT346/KX-NT366 installation instructions Important Information

Page 19

Important Information

When using KX-NT300 series IP-PTs, keep the following conditions in mind.

If the unit does not operate properly, disconnect the unit from the Ethernet cable and then connect again.

If you are having problems making calls, disconnect the Ethernet cable and connect a known working IP-PT. If the known working IP-PT operates properly, have the defective IP-PT repaired by an authorised Panasonic factory service centre. If the known working IP-PT does not operate properly, check the PBX and the Ethernet cable.

Wipe the unit with a soft cloth. Do not clean the unit with abrasive powders or with chemical agents such as benzene or thinner.

Use only the correct Panasonic handset.

Do not disassemble this unit. Dangerous electrical shock could result. The unit must only be disassembled and repaired by qualified service technicians.

If damage to the unit exposes any internal parts, immediately disconnect the cable or cord. If the power is supplied from the network to the IP-PT [Power-over-Ethernet], disconnect the Ethernet cable. Otherwise, disconnect the AC adaptor cord. Then return this unit to a service centre.

Never attempt to insert wires, pins, etc. into the vents or other holes of this unit.

This unit is designed to aid the visually handicapped to locate dial keys and buttons.

This unit is designed to be installed under controlled conditions of ambient temperature and a relative humidity.

Avoid installing the unit in damp or humid environments, such as bathrooms or swimming pools.

999 and 112 can be dialled on the product after accessing the CO line for the purpose of making outgoing calls to the BT emergency (999) and (112) services (United Kingdom only).

Take special care to follow the safety suggestions listed below. Safety

1)The unit should only be connected to a power supply of the type described in the Quick Reference Guide or as shown on the label on the unit.

2)When left unused for a long period of time, the optional AC adaptor should be unplugged from the AC outlet, if you are using Power-over- Ethernet, disconnect the Ethernet cable.

19

Image 19
Contents This model supports the following PBX versions IP Proprietary TelephoneTrademark LCD Liquid Crystal Display Location of ControlsHold Used to place a call on hold Settings Icon Meanings Features ListMaking Calls During a Conversation Useful FeaturesMultiple Party Conversation Timed Reminder Setting the Telephone According to Your NeedsBefore Leaving Your Desk Do Not DisturbListening to a message Making Use of the Voice Mail ServiceLeaving a message Using the LCD Display Accessing Features Using the DisplayDuring playback Option mode Standard modeSelf Labelling KX-NT366 only Desired no Max digits Setting the Self Labelling LCD Display contrast levelsLocking the Handset Hook Operation Board Angle AdjustmentTo raise To lowerPC connection ConnectionWhen connecting cables When selecting Ethernet cablesWhen connecting headset jack KX-NT303 For KX-NT343/KX-NT346 Installing the KX-NT303/KX-NT305For attaching to the unit For wall mounting KX-NT305 For KX-NT343/KX-NT346Attach the wall mounting adaptor as shown Wall MountingImportant Information Placement Installation EnvironmentMixed with general household waste For business users in the European Union0682 Wall Mounting Template Copyright Panasonic Business Systems U.K