Panasonic KX-NT343/KX-NT346/KX-NT366 Operation Board Angle Adjustment, To raise, To lower

Page 13

Operation Board Angle Adjustment

The angle of the operation board can be set to one of eight angles (level 1 = 0°, level 8 = 45°).

8 7654

3

2

1

CAUTION:

Hold the operation board until the operation board is secured at the desired angle. Make sure you do not pinch your fingers when raising or lowering the operation board.

To raise:

Gently lift the operation board one level at a time.

To lower:

Raise the operation board to level 8. Next, with one hand on the base of the unit, lift the operation board again to release the latch, then slowly push the operation board down to level 1. If the operation board cannot be lowered to level 1, repeat this step.

When a KX-NT305 is attached to this unit, first lift the unit’s handset cradle to release the

latch (A), then with one hand on the base of the KX-NT305, similarly lift its operation board to release its latch (B).

Locking the Handset Hook

Pull down the handset hook until it locks to prevent the handset from falling off the handset cradle when the unit is mounted to a wall or set at a high angle. To temporarily place the handset down during a conversation, hook it over the top edge of the unit as shown.

13

Image 13
Contents This model supports the following PBX versions IP Proprietary TelephoneTrademark LCD Liquid Crystal Display Location of ControlsHold Used to place a call on hold Settings Icon Meanings Features ListMaking Calls During a Conversation Useful FeaturesMultiple Party Conversation Before Leaving Your Desk Setting the Telephone According to Your NeedsDo Not Disturb Timed ReminderListening to a message Making Use of the Voice Mail ServiceLeaving a message Using the LCD Display Accessing Features Using the DisplayDuring playback Option mode Standard modeSelf Labelling KX-NT366 only Desired no Max digits Setting the Self Labelling LCD Display contrast levelsTo raise Operation Board Angle AdjustmentTo lower Locking the Handset HookPC connection ConnectionWhen connecting cables When selecting Ethernet cablesWhen connecting headset jack KX-NT303 For KX-NT343/KX-NT346 Installing the KX-NT303/KX-NT305For attaching to the unit For wall mounting KX-NT305 For KX-NT343/KX-NT346Attach the wall mounting adaptor as shown Wall MountingImportant Information Placement Installation EnvironmentMixed with general household waste For business users in the European Union0682 Wall Mounting Template Copyright Panasonic Business Systems U.K