Panasonic VL-G201 Standard installation position of the monitor station

Page 14

Introduction and Installation

Note:

LThe measurements and angles are for reference purposes and may vary depending on the environment.

LIf a strong light is shining on the door station, the visitor’s face may not be distinguishable. Do not place the door station in the following locations.

Where most of the background is the sky.

Where the background is a white wall, and direct sunlight will reflect off it.

Where direct sunlight will shine on the door station.

Where echoing occurs, causing the unit to beep frequently.

LMake sure the back of the door station is not subject to water.

Standard installation position of the monitor station

Place the monitor station in a location so that your eyes are the same height as the centre of the display.

Note:

LIn areas surrounded by high electrical field, disturbance may occur in the monitor station’s image or sound.

LBe sure to install the monitor station more than 5 m away from the door station.

LDo not place any objects within 20 cm of the monitor station. This may cause communication errors or malfunction.

LDo not install the monitor station inside a wall.

14

Image 14
Contents Installation and Operation Guide Thank you for purchasing a Panasonic Video Intercom SystemImportant Information Important safety instructions Important InformationImportant Information Additional safety information For business users in the European UnionFor your safety For best performance Included items QuantityFor German users Compatible Panasonic PBXsFor UK and Ireland users Location of controls Front view Side view Rear viewAnswer switch Talking indicatorRinger Volume switch PBX Mode switchSpeaker Water drain hole Front view Rear view CameraMicrophone Call Button Camera angle control leverBefore installation Standard installation position of the monitor station Wiring schematic diagram Power cable/wire type and distanceInstalling the door station Non polar Screw Wire Not included Introduction and Installation Introduction and Installation Installing the monitor station Introduction and Installation Introduction and Installation Power cord To attach the AC adaptor and the DC terminal to a wall Introduction and Installation Correct Incorrect To attach the power cable Monitor station DC terminalTo attach the wires When connected to a door Door Opener Using with another machineWhen connected to a PBX Please use only a Panasonic PBXTurning PBX Mode switch ON/OFF Using the Unit Connecting to a PBX Answering a door call Available answer modesPush mode Push to talk mode Using the Unit Monitoring the outside Monitor Bright TalkOpening a door Door Opener DoorTroubleshooting Problem Cause and solutionCleaning Technical data about this product General Information Copyright For your future referenceAttach your sales receipt here