Panasonic VL-G201 installation and operation guide Connecting to a PBX

Page 30

Using the Unit

Connecting to a PBX

Connecting to a PBX allows you to answer door calls from any telephone. See page 15 for wiring information.

Please use only a Panasonic PBX. See page 9 for the PBX model list that is compatible and other optional hardware.

Important:

LMake sure {PBX MODE} switch is set to {ON} beforehand (page 28). The default setting is {OFF}.

LIf you connect to a PBX while {PBX MODE} switch is set to {OFF}, voices may be muted for approximately 2 seconds before you can start talking or listening to the caller.

PBX MODE

OFF ON

{PBX MODE} switch

Note:

LIf you answer a call from the door station with a PBX extension, the camera image from the door station will be displayed at the monitor station. If the monitor station user tries to answer the call, a beep will sound. The display will turn off when the conversation has ended or when the conversation continued for more than about 3 minutes.

LIf you answer a call from the door station with the monitor station, the call will continue to ring at the PBX for about 15 to 30 seconds. If the PBX user answers the call while the call is still ringing, the door station user, the monitor station user, and the PBX user can speak together.

30

Image 30

Contents Installation and Operation Guide Thank you for purchasing a Panasonic Video Intercom SystemImportant Information Important safety instructions Important InformationImportant Information Additional safety information For business users in the European UnionFor your safety For best performance Included items QuantityCompatible Panasonic PBXs For UK and Ireland usersFor German users Location of controls Front view Side view Rear viewAnswer switch Talking indicatorRinger Volume switch PBX Mode switchSpeaker Water drain hole Front view Rear view CameraMicrophone Call Button Camera angle control leverBefore installation Standard installation position of the monitor station Wiring schematic diagram Power cable/wire type and distanceInstalling the door station Non polar Screw Wire Not included Introduction and Installation Introduction and Installation Installing the monitor station Introduction and Installation Introduction and Installation Power cord To attach the AC adaptor and the DC terminal to a wall Introduction and Installation To attach the power cable Monitor station DC terminal To attach the wiresCorrect Incorrect When connected to a door Door Opener Using with another machineWhen connected to a PBX Please use only a Panasonic PBXTurning PBX Mode switch ON/OFF Using the Unit Connecting to a PBX Answering a door call Available answer modesPush mode Push to talk mode Using the Unit Monitoring the outside Monitor Bright TalkOpening a door Door Opener DoorTroubleshooting Problem Cause and solutionCleaning Technical data about this product General Information For your future reference Attach your sales receipt hereCopyright