Linksys PAP2 Devices Administrator’s Guide
IMPORTANT: Be certain that you are using the correct string for your particular PAP device model number. Failure to do so will render the device
13.Click the Submit all changes button at the
bottom of the page 
.
14.Reboot the PAP device by disconnecting the A/C power cord from the device, waiting 5 seconds, and
15.After the adapter reboots, if an account has already been created for the device in PRC (Partner Resource Center), verify that the configuration was successful by noting that the blue PHONE 1/2 LED is lit.
If an account has not yet been created for the device in PRC, the PHONE 1/2 LED will remain unlit.
Once an account has been created in PRC for the device, reboot the device. The LEDs will then turn blue.
NOTE: After the provisioning is complete, the Admin pages on the PAP2 device web interface will not be accessible. The user can only access the Info, System, and User tabs from the PAP2 device’s Web interface. The device also cannot be restored to its factory default settings from the phone IVR menu.
8