Linksys PAP2T-NA manual Disclaimer, All Rights Reserved. Copyright

Page 2
All Rights Reserved. Copyright © 2007

All Rights Reserved. Copyright © 2007

The use, disclosure, modification, transfer, or transmittal of this work for any purpose, in any form, or by any means, without the written permission of the copyright holder, is strictly forbidden.

Disclaimer

The content of this manual is subject to change without notice and should not be construed as a commitment by the manufacturer, distributor, or service provider. This manual is furnished for informational use only and the manufacturer, distributor, or service provider assumes no responsibility for any errors or inaccuracies that may appear herein.

Image 2
Contents Page Disclaimer All Rights Reserved. CopyrightLinksys PAP2 Devices Administrator’s Guide Table of ContentsREMOVING VOICELINE SERVICE 1 WELCOME1 1 Welcome OverviewRefer to the following images to identify your PAP2 device Configuring the PAP2 device with Net2Phone’s Provisioning ServerPAP2-NA TO PROVISION THE LINKSYS PAP2 DEVICEPAP2T-NA PAP2T-R Once the adapter is connected to the network PAP2-NA or PAP2T-NA, continue with the next step9. Enter your Login and Password 10. Click the switch to advanced view link at the top of the pagePAP2-NA http//prov1.net2phone.com/pap2/prov.aspx?id=$ MA&ver=$SWVER 11. Select the Provisioning tab at the top of the pagePAP2T http//prov1.net2phone.com/pap2t/prov.aspx?id=$MA &ver=$SWVER 13. Click the Submit all changes button at the bottom of the page The device will reset to factory defaults Removing VoiceLine ServiceAfter rebooting, lift the handset to ensure there is no dial tone