Linksys PAP2T-NA manual Removing VoiceLine Service, The device will reset to factory defaults

Contents Page All Rights Reserved. Copyright Disclaimer1 WELCOME Table of ContentsREMOVING VOICELINE SERVICE Linksys PAP2 Devices Administrator’s GuideOverview 1 1 WelcomeTO PROVISION THE LINKSYS PAP2 DEVICE Configuring the PAP2 device with Net2Phone’s Provisioning ServerPAP2-NA Refer to the following images to identify your PAP2 devicePAP2T-NA PAP2T-R PAP2-NA or PAP2T-NA, continue with the next step Once the adapter is connected to the network11. Select the Provisioning tab at the top of the page 10. Click the switch to advanced view link at the top of the pagePAP2-NA http//prov1.net2phone.com/pap2/prov.aspx?id=$ MA&ver=$SWVER 9. Enter your Login and PasswordPAP2T http//prov1.net2phone.com/pap2t/prov.aspx?id=$MA &ver=$SWVER 13. Click the Submit all changes button at the bottom of the page The device will reset to factory defaults Removing VoiceLine ServiceAfter rebooting, lift the handset to ensure there is no dial tone