Linksys PAP2T-NA manual Configuring the PAP2 device with Net2Phone’s Provisioning Server, PAP2-NA

Page 5

Configuring the PAP2 device with Net2Phone’s Provisioning Server

Linksys PAP2 Devices Administrator’s Guide

Configuring the PAP2 device with Net2Phone’s Provisioning Server

NOTE: The provisioning process can be completed prior to provisioning the device in the Partner Resource Center.

TO PROVISION THE LINKSYS PAP2 DEVICE:

1.Determine which PAP2 device you are using.

By turning the device over you can view the model number of the device type you are configuring – PAP2-NA, PAP2T-NA, or PAP2T-R.

Refer to the following images to identify your PAP2 device:

PAP2-NA

3

Image 5

Contents Page All Rights Reserved. Copyright DisclaimerREMOVING VOICELINE SERVICE Table of ContentsLinksys PAP2 Devices Administrator’s Guide 1 WELCOMEOverview 1 1 WelcomePAP2-NA Configuring the PAP2 device with Net2Phone’s Provisioning ServerRefer to the following images to identify your PAP2 device TO PROVISION THE LINKSYS PAP2 DEVICEPAP2T-NA PAP2T-R PAP2-NA or PAP2T-NA, continue with the next step Once the adapter is connected to the networkPAP2-NA http//prov1.net2phone.com/pap2/prov.aspx?id=$ MA&ver=$SWVER 10. Click the switch to advanced view link at the top of the page9. Enter your Login and Password 11. Select the Provisioning tab at the top of the pagePAP2T http//prov1.net2phone.com/pap2t/prov.aspx?id=$MA &ver=$SWVER 13. Click the Submit all changes button at the bottom of the page The device will reset to factory defaults Removing VoiceLine ServiceAfter rebooting, lift the handset to ensure there is no dial tone