Grandstream Networks HT701, HT704, HT702 Basic Operations, Understanding HT70X Voice Prompt

BASIC OPERATIONS

Understanding HT70X Voice Prompt

HT70X has a built-in voice prompt menu for simple device configuration. The IVR menu and the LED button work with any of the FXS port. Pick up the handset and dial “***” to use the IVR menu.

Table 6: HT70X IVR Menu Definitions

	Menu	Voice Prompt		Options
	Main Menu	“Enter a Menu Option”		Press “*” for the next menu option
				Press “#” to return to the main menu
				Enter 01-05, 07,10, 13-17,47 or 99		menu options
	01	“DHCP Mode”,		Press “9” to toggle the selection
		“Static IP Mode”		If using “Static IP Mode”, configure the IP address information using
				menus 02 to 05.
				If using “Dynamic IP Mode”, all IP address information comes from
				the DHCP server automatically after reboot.
	02	“IP Address “ + IP address		The current WAN IP address is announced
				If using “Static IP Mode”, enter 12 digit new IP address. You need to
				reset the HT for the new IP address to take Effect.
	03	“Subnet “ + IP address		Same as menu 02
	04	“Gateway “ + IP address		Same as menu 02
	05	“DNS Server “ + IP address		Same as menu 02
	07	Preferred Vocoder		Press “9” to move to the next selection in the list:
				∙ PCM U / PCM A
				∙	iLBC
				∙	G-726
				∙	G-723
				∙	G-729
	10	“MAC Address”		Announces the Mac address of the unit.
	13	Firmware Server IP		Announces current Firmware Server IP address. Enter 12 digit new
		Address		IP address.
	14	Configuration Server IP		Announces current Config Server Path IP address. Enter 12 digit
		Address		new IP address.
	15	Upgrade Protocol		Upgrade protocol for firmware and configuration update. Press “9” to
				toggle between TFTP / HTTP / HTTPS
	16	Firmware Version		Firmware version information.
	17	Firmware Upgrade		Firmware upgrade mode. Press “9” to toggle among the following
				three options:
					- always check
					- check when pre/suffix changes
					- never upgrade
	47	“Direct IP Calling”		Enter the target IP address to make a direct IP call, after dial tone.
				(See “Make a Direct IP Call”.)
	86	Voice Mail		Number of Voice Mails
	99	“RESET”		Press “9” to reboot the device
				Enter MAC address to restore factory default setting
				(See Restore Factory Default Setting section)
		“Invalid Entry”		Automatically returns to main menu
Grandstream Networks, Inc.				HT-70X User Manual		Page 11 of 35
			Firmware Version 1.0.0.18			Last Updated: 03/2012