Grandstream Networks HT701, HT704, HT702 Advanced User Configuration, Advanced Settings, Dnd, Fxs

Page 20

Port Status

Displays relevant information regarding the FXS port.

Port

Hook

Registration

DND

Forward

Busy

Delayed

 

 

 

 

 

Forward

Forward

FXS

On Hook

Registered

Yes

613

 

 

 

 

 

FXS port is registered with SIP Server.

FXS Port user has set Do Not Disturb.

FXS Port user has set his calls to be unconditionally forwarded to ext 613.

FXS Port user has not set Busy or Delay call Forward.

Advanced User Configuration

Log in to the advanced user configuration page the same way as for the basic configuration page. The password is case sensitive and the factory default password for Advanced User is “admin”.

Advanced User configuration includes the end user configuration and the advanced configurations including: a) SIP configuration, b) Codec selection, c) NAT Traversal Setting and d) other miscellaneous configuration. HT701 and HT702 FXS SIP account(s) have its own configuration page. HT704 has two (2) profiles for the four (4) FXS ports.

Table 10: Advanced Settings

 

 

 

 

 

 

Admin Password

 

This contains the password to access the Advanced Web Configuration page. This field is

 

 

 

 

 

 

 

case sensitive. Only the administrator can configure the “Advanced Settings” page.

 

 

 

 

Password field is purposely left blank for security reasons after clicking update and saved.

 

 

 

 

The maximum password length is 25 characters.

 

 

 

 

 

 

 

 

 

 

 

 

Layer 3 QoS

 

 

 

 

 

This field defines the layer 3 QoS parameter which can be the value used for IP

 

 

 

 

Precedence or Diff-Serv or MPLS. Default value is 48.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Layer 2 QoS

 

Value used for layer 2 VLAN tag. Default setting is blank.

 

 

 

 

 

 

 

 

 

 

 

 

STUN Server

 

 

 

 

 

IP address or Domain name of the STUN server.

 

 

 

 

 

 

 

 

 

 

 

 

Keep-alive interval

 

 

 

 

 

This parameter specifies how often the HT70X sends a blank UDP packet to the SIP

 

 

 

 

server in order to keep the “hole” on the NAT open. Default is 20 seconds. Minimum

 

 

 

 

value is 20 seconds.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use STUN to detect

 

Use STUN keep-alive to detect WAN side network problems. If keep-alive request does

 

 

network connectivity

 

not yield any response for configured number of times, the device will restart the TCP/IP

 

 

 

 

stack. If the STUN server does not respond when the device boots up, the feature is

 

 

 

 

disabled. Default setting is No.

 

 

 

 

 

 

 

 

 

 

 

 

Firmware Upgrade

 

 

 

 

 

Enables HT70X to download firmware or configuration file through either the TFTP, HTTP

 

 

and Provisioning

 

or HTTPS server.

 

 

 

 

 

 

Grandstream Networks, Inc.

HT-70X User Manual

Page 20 of 35

 

Firmware Version 1.0.0.18

Last Updated: 03/2012

Image 20
Contents Grandstream Networks, Inc HT701 HT702Onfiguring the HT70X Through V Oice P Rompts Configuration GUI Interface Examples Welcome Safety CompliancesWarranty Equipment Packaging Connecting the HT70XConnect Your HT70X Definitions of the HT70X Connectors Power LEDBasic Definitions of the HT70X LEDs Pattern HT702 HT704Advanced Definitions of the HT70X LEDs Pattern Analog Product Overview Software Features OverviewHT70X Software Features EMC Hardware SpecificationHT70X Hardware and Technical Specifications HT70X IVR Menu Definitions Basic OperationsUnderstanding HT70X Voice Prompt Using IVR Using Star CodePlacing a Phone Call ExamplesCall Hold Call WaitingCall Transfer Or Voice Prompt with option 47, then 192*168*0*160Way Conferencing Fax SupportAttended Transfer Instructions for 3-way conferenceCall Features HT70X Call FeaturesEnable Srtp Disable Srtp Blind TransferConfiguring the HT70X Via Web Browser Configuration GuideConfiguring the HT70X through Voice Prompts Important Settings NAT SettingsBasic Settings NAT StatusMTZ+6MDT+5 Advanced User Configuration Advanced SettingsDND FXSHTTP/HTTPS ACS URL URISyslog Level Primary RadiusAccount Settings Unregister on Reboot Enable Ring-TransferDisable Bellcore Style SIP T1 TimeoutDisable Dtmf Enable Call FeaturesDisable Call Waiting Disable Call-WaitingNo Key Entry Timeout Early DialDial Plan Prefix Use # as Dial KeyVAD Fax Mode Detection ModeSrtp Mode Slic SettingRebooting the HT70X from Remote HT704 FXS Ports SettingsSaving the Configuration Changes Configuration through a Central Server Instructions for Upload from Local Directory Software UpgradeFirmware Upgrade through TFTP/HTTP/HTTPS Instructions for local firmware upgrade using Tftp server Configuration File DownloadFirmware and Configuration File Prefix and Postfix Managing Firmware and Configuration File DownloadYes, every Restore Factory Default Setting Encode the MAC Address
Related manuals
Manual 52 pages 18.05 Kb

HT704, HT701, HT702 specifications

Grandstream Networks has established itself as a powerful player in the telecommunications industry, especially through its Analog Telephone Adapters (ATAs) like the HT702 and HT704 models. These devices are designed specifically for converting analog voice signals into digital data for seamless integration with Voice over Internet Protocol (VoIP) systems.

The Grandstream HT702 is a two-port ATA that allows users to connect two analog phones to a high-speed internet connection. This model is particularly useful for small businesses or residential users looking to integrate legacy phone systems with modern VoIP technology. One of the key features of the HT702 is its support for the SIP (Session Initiation Protocol) standard, ensuring compatibility with a wide range of VoIP providers. Additionally, it supports advanced telephony features like call transfer, call waiting, and three-way calling, enhancing communication efficiency.

The HT704, on the other hand, is a four-port ATA, offering greater flexibility for users needing to connect multiple devices. It shares many of the same features as the HT702, including SIP support and telephony functionalities, but with additional ports, it is better suited for larger environments. Both models come equipped with advanced security mechanisms, such as AES encryption, which safeguards voice communications.

With user-friendly web-based configuration, the HT702 and HT704 allow for easy setup and management, making them accessible even for those without extensive technical knowledge. Moreover, both devices feature auto-provisioning capabilities, which simplify deployment across multiple units, making them ideal for businesses looking to scale their operations.

The HT702 and HT704 are built with high-quality materials, ensuring durability and long-term performance. They also boast low power consumption, making them an energy-efficient choice. Support for high-definition voice codecs enhances audio quality during calls, providing users with crystal-clear communication.

In summary, Grandstream's HT702 and HT704 Analog Telephone Adapters are robust solutions for anyone looking to transition from traditional telephony to a modern VoIP setup. Their advanced features, security standards, and ease of use make them a reliable choice for both home and business users seeking efficient and effective communication solutions.