Grandstream Networks 486 user manual Dmz Ip, Advanced User Configuration

Page 17

HandyTone-486 User ManualGrandstream Networks, Inc.

LAN DHCP Base IP: Base IP for the LAN port, which function as a Gateway for the subnet.

 

Default value is 192.168.2.1

DHCP IP Lease

Value is set in units of hours. Default value is 120hr (5 Days.) The

Time:

time IP address are assigned to the LAN clients

DMZ IP:

Forward all WAN IP traffic to a specific IP address if no matching port

 

is used by HandyTone-486 itself or in the defined port forwarding.

Port Forwarding:

Allow the user to forward a matching (TCP/UDP) port to a specific

 

LAN IP address with a specific (TCP/UDP) port.

6.2.3Advanced User Configuration

To login to the Advanced User Configuration page, follow the instruction in section 6.2.1 to get to the following login page. The password is case sensitive and the factory default password for Advanced User is ‘admin’.

Welcome to Grandstream HandyTone-486

Password

Login

Advanced User configuration page includes not only the end user configuration, but also some advanced configuration such as SIP configuration, Codec selection, NAT Traversal

Setting and other miscellaneous configuration. Following is the snap shot of the configuration page.

Grandstream HandyTone 486 Configuration

MAC Address:

00.0B.82.01.29.DA

Product Model:

HT486

Software Version:

Program--1.0.5.16 Bootloader--1.0.0.21 HTML--1.0.0.41 VOC--1.0.0.7

 

detected NAT type is full cone

Admin Password:

(admin user password to configure this IP phone)

 

End User Password:

(end user password to configure this IP phone)

 

WAN IP Address:

dynamically assigned via DHCP (default) or PPPoE

 

17

Image 17
Contents For SW Release Version HandyTone-486Table of Contents Welcome Top View Side Views InstallationSafety Compliances What is Included in the PackageProduct Overview Key FeaturesModel HandyTone-486 Hardware SpecificationGet Familiar with Key Pad and Voice Prompt Basic OperationsDirect IP calls Make Phone CallsCalling phone or extension numbers Attended Transfer Voice Prompt with option 47, thenBlind Transfer Send and Receive Pstn Calls Through Pstn Line Port Call FeaturesCall Features Table Pstn Pass Through LED Light Pattern IndicationConfiguring HandyTone-486 with Web Browser Configuration GuideConfiguring HandyTone-486 WAN IP through Voice Prompt Grandstream HandyTone 486 Configuration DMZ IP MAC Address DMZ IP Advanced User ConfigurationAdvanced Options Layer 2 QoS Use DNS SRV User ID is phone number LAN IP LAN IP LAN IP LAN IP LAN IP LAN IP LAN IP LAN IP G723 Rate Early Dial Offhook Rebooting the HandyTone-486 from remote Saving the Configuration ChangesConfiguration through a Central Server Upgrade through Tftp Software UpgradeUpgrade through Http Grandstream Networks, Inc Restore Factory Default Setting
Related manuals
Manual 34 pages 18.65 Kb