Grandstream Networks 486 user manual Layer 2 QoS Use DNS SRV User ID is phone number

Page 19

HandyTone-486 User Manual

Grandstream Networks, Inc.

Layer 2 QoS:

Use DNS SRV:

User ID is phone number:

SIP Registration: Unregister On Reboot:

Register Expiration: Early Dial:

Dial Plan Prefix: No Key Entry Timeout:

Use # as Dial Key: local SIP port: local RTP port:

Use random port: NAT Traversal:

keep-alive interval: Use NAT IP Proxy-Require:

TFTP Upgrade Server: HTTP Upgrade Server:

Auto Upgrade: SUBSCRIBE for MWI:

Offhook Auto-Dial:

Enable Call Features:

Disable Call-Waiting:

Send DTMF: DTMF Payload Type:

Send Flash Event:

802.1Q/VLAN Tag

0

802.1p priority value

0

(0-7)

 

 

No

 

Yes

 

 

 

 

No

 

Yes

 

 

 

 

Yes

 

No

 

 

 

 

Yes

 

No

 

 

 

 

60

(in minutes. default 1 hour, max 45 days)

 

 

 

 

 

No

 

Yes (use "Yes" only if proxy supports 484 response)

 

(this prefix string is added to each dialed number)

 

4

(in seconds, default is 4 seconds)

 

 

 

 

 

No

 

Yes (if set to Yes, "#" will function as the "(Re-)Dial" key)

5060

(default 5060)

 

 

 

 

 

 

 

5004

(1024-65535, default 5004)

 

 

 

 

 

No

 

Yes

 

 

 

 

No

 

 

 

 

 

 

Yes, STUN server is:

 

 

(URI or IP:port)

20

(in seconds, default 20 seconds)

 

 

 

 

 

 

 

 

 

(if specified, this IP address is used in SIP/SDP message)

 

 

 

 

(if specified, the content will appear in Proxy-Require header)

67 .

153 .

142 .

66

(for remote software upgrade and configuration)

 

 

 

 

(IP address or URL)

 

 

No

 

Yes, check for new firmware every

7

days (default 7 days)

 

 

No, do not send SUBSCRIBE for Message Waiting Indication Yes, send periodical SUBSCRIBE for Message Waiting Indication

 

(User ID/extension to dial automatically when offhook)

No

Yes (if Yes, Call Forwarding & Do-Not-Disturb are supported locally)

No

Yes

 

in-audio

via RTP (RFC2833)

via SIP INFO

101

 

 

No

Yes (Flash will be sent as a DTMF event if set to Yes)

19

Image 19
Contents For SW Release Version HandyTone-486Table of Contents Welcome Top View Side Views InstallationSafety Compliances What is Included in the PackageProduct Overview Key FeaturesModel HandyTone-486 Hardware SpecificationGet Familiar with Key Pad and Voice Prompt Basic OperationsCalling phone or extension numbers Make Phone CallsDirect IP calls Blind Transfer Voice Prompt with option 47, thenAttended Transfer Call Features Table Call FeaturesSend and Receive Pstn Calls Through Pstn Line Port Pstn Pass Through LED Light Pattern IndicationConfiguring HandyTone-486 WAN IP through Voice Prompt Configuration GuideConfiguring HandyTone-486 with Web Browser Grandstream HandyTone 486 Configuration DMZ IP MAC Address DMZ IP Advanced User ConfigurationAdvanced Options Layer 2 QoS Use DNS SRV User ID is phone number LAN IP LAN IP LAN IP LAN IP LAN IP LAN IP LAN IP LAN IP G723 Rate Early Dial Offhook Rebooting the HandyTone-486 from remote Saving the Configuration ChangesConfiguration through a Central Server Upgrade through Http Software UpgradeUpgrade through Tftp Grandstream Networks, Inc Restore Factory Default Setting
Related manuals
Manual 34 pages 18.65 Kb