Grandstream Networks, Inc. | ||
Auto Upgrade | Choose Yes to enable HTTP upgrade and provisioning. |
|
| In “Check for new firmware every” field, enter the number of days to check the HTTP | |
| server for firmware upgrade or configuration. |
|
Subscribe for MWI: | Default is NO. When set to Yes a SUBSCRIBE for Message Waiting Indication will be | |
| sent periodically. |
|
Offhook | This parameter allows a user to configure a User ID or extension number to be | |
| automatically dialed upon offhook. Please note that only the user part of a SIP address | |
| needs to be entered here. The HandyTone ATA will automatically append the “@” and | |
| the host portion of the corresponding SIP address. |
|
Enable Call Features | Default is No. If set to Yes, Call Forwarding & | |
Disable Call Waiting | Default is No. |
|
Send DTMF | This parameter controls the way DTMF events are transmitted. There are 3 ways: in | |
| audio which means DTMF is combined in audio signal (not very reliable with | |
| rate codec), via RTP (RFC2833), or via SIP INFO. |
|
DTMF Payload Type | This parameter sets the payload type for DTMF using RFC2833 | |
Send Flash Event | This parameter allows a user to control whether to send an SIP NOTIFY message | |
| indicating the Flash event, or just to switch to the voice channel when the user presses | |
| the Flash key. |
|
FXS Impedance | Selects the impedance of the analog telephone connected to the Phone port. | |
NTP server | This parameter defines the URI or IP address of the NTP server which the HandyTone | |
| ATA will use to display the current date/time. |
|
Send Anonymous | If this parameter is set to “Yes”, the “From” header in outgoing INVITE message will be | |
| set to anonymous, essentially blocking the Caller ID from displaying. | |
Lock keypad update | If this parameter is set to “Yes”, the configuration update via keypad is disabled. | |
WAN side http | If this parameter is set to “No”, the HTML configuration update via WAN port is | |
access | disabled. |
|
23