Uniden UH047sx manual Belt Clip, LOW Battery Alert, Back Light, To attach the belt clip

Page 5

BELT CLIP

To attach the belt clip:

Slide the belt clip until it snaps into place.

To remove the belt clip:

To remove the belt clip, press and hold belt clip locker, slide the belt clip at the same time until released.

LOW BATTERY ALERT

If the battery level becomes low, the battery indicator icon on the display begins flashing. When the batteries in the unit are low, the unit will go into a battery Low mode. The Transmit mode is disabled. Replace the alkaline batteries immediately or if you are using the NiMH battery pack, place the radio on the charge cradle to recharge. Full charge will take up to 16 Hrs.

BACK LIGHT

The uh047sx has an automatic display back light which remains on for 10 seconds after a key press (all keys except PTT key). The back light will work even if the keypad is locked but will not work during low battery alert mode.

(4)

Image 5 Contents
Uh047sx Included in Your Package Control & IndicatorsGetting Started Battery InstallationTo install the batteries User Licence Information Installing the Charge CradleBelt Clip LOW Battery AlertBack Light To attach the belt clipOperation Selecting a Channel Monitor Automatic Squelch FeatureScanning To use monitorOperation with the aid of a Repeater DCS Ctcss & DCSTo select a call tone VOXTransmitting a Call Tone Scan Channel Memory Priority Scan ChannelTo set a priority scan channel To set BCL ON/OFFPlease follow these guidelines for channel use in Australia UHF CB Channels & FrequenciesCtcss & DCS Code List Uniden UH047SX UHF CB Tranceiver Radio WarrantyUniden Australia Pty Limited/Uniden New Zealand Limited