Uniden UH047sx manual Installing the Charge Cradle, User Licence Information

Page 4

INSTALLING THE CHARGE CRADLE

1.Plug the AC adaptor into the rear of the charge cradle and into the mains power.

2.Place the uh047sx into the charge cradle. The charge light will come on to indicate the unit is charging.

3.Before operating the uh047sx, charge the battery pack for 16 hours.

Do not charge alkaline or non rechargeable batteries.

USER LICENCE INFORMATION

The citizen band radio service is licenced in Australia by ACMA Radio-communications (Citizen Band Radio Stations) Class Licence and in New Zealand by MED General User Licence for Citizen Band Radio and operation is subject to conditions contained in those licences.

(3)

Image 4

Contents Uh047sx Control & Indicators Included in Your PackageTo install the batteries Battery InstallationGetting Started Installing the Charge Cradle User Licence InformationLOW Battery Alert Belt ClipBack Light To attach the belt clipOperation Selecting a Channel Automatic Squelch Feature MonitorScanning To use monitorOperation with the aid of a Repeater Ctcss & DCS DCSTransmitting a Call Tone VOXTo select a call tone Priority Scan Channel Scan Channel MemoryTo set a priority scan channel To set BCL ON/OFFUHF CB Channels & Frequencies Please follow these guidelines for channel use in AustraliaCtcss & DCS Code List Warranty Uniden UH047SX UHF CB Tranceiver RadioUniden Australia Pty Limited/Uniden New Zealand Limited