REPLY DELAY
While scanning, the uh047sx stops at a busy channel and receives a transmission. When the received signal is over, the unit will wait for 2 seconds for the return of the signal, otherwise, the radio resumes scanning.
TO OPERATE IN DUPLEX MODE (REPEATERS)
The Duplex function enables you to access local repeater stations. You can only activate Duplex from
UHF CB Repeaters are used to retransmit or relay your signal. Repeaters will extend the range of your radio and overcome the shielding effect caused by solid obstructions.
Contact your retailer for a list of repeaters available in
Your area.
Operation with the aid of a Repeater
1. | Press select/ | key six times. | P | P appears on the display. | |
| |||||
2. | Press | or | to change o to . |
| |
3. | Press select/ | to confirm |
|
| |
To deactivate the duplex operation repeat activation process and change 
to o. uh047sx will return to normal operation.
If 
or key is pressed when the channel is not from Ch01 - Ch08, an error tone sounds.
(8)