Uniden uh064sx-2 manual Installing the Charge Cradle, User Licence Information

Page 4

INSTALLING THE CHARGE CRADLE

1.Plug the AC adaptor into the rear of the charge cradle and into the mains power.

2.Place the uh064sx into the charge cradle. The charge light will come on to indicate the unit is charging.

3.Before operating the uh064sx, charge the battery pack for 16 hours.

Do not charge alkaline or non rechargeable batteries.

USER LICENCE INFORMATION

The citizen band radio service is licenced in Australia by ACMA Radio-communications (Citizen Band Radio Stations) Class Licence and in New Zealand by MED General User Licence for Citizen Band Radio and operation is subject to conditions contained in those licences.

(3)

Image 4
Contents Uh064sx-2 Control & Indicators Included in Your PackageBattery Installation Getting StartedInstalling the Charge Cradle User Licence InformationBelt Clip LOW Battery AlertBack Light Operation Selecting a Channel Monitor Automatic Squelch FeatureScanning Operation with the aid of a Repeater Ctcss & DCS DCSVOX Transmitting a Call TonePriority Scan Channel Scan Channel MemoryUHF CB Channels & Frequencies Please follow these guidelines for channel use in AustraliaCtcss & DCS Code List Warranty Uniden UH064SX-2 UHF CB Transceiver RadioUniden Australia Pty Limited/Uniden New Zealand Limited