Uniden uh064sx-2 manual Belt Clip, LOW Battery Alert, Back Light

Page 5

BELT CLIP

To attach the belt clip:

Slide the belt clip until it snaps into place.

To remove the belt clip:

To remove the belt clip, press and hold belt clip locker, slide the belt clip at the same time until released.

LOW BATTERY ALERT

If the battery level becomes low, the battery indicator icon on the display begins flashing. When the batteries in the unit are low, the unit will go into a battery Low mode. The Transmit mode is disabled. Replace the alkaline batteries immediately or if you are using the NiMH battery pack, place the radio on the charge cradle to recharge. Full charge will take up to 16 Hrs.

BACK LIGHT

The uh064sx has an automatic display back light which remains on for 10 seconds after a key press (all keys except PTT key). The back light will work even if the keypad is locked but will not work during low battery alert mode.

(4)

Image 5
Contents Uh064sx-2 Included in Your Package Control & IndicatorsGetting Started Battery InstallationUser Licence Information Installing the Charge CradleBack Light LOW Battery AlertBelt Clip Operation Selecting a Channel Scanning Automatic Squelch FeatureMonitor Operation with the aid of a Repeater DCS Ctcss & DCSTransmitting a Call Tone VOXScan Channel Memory Priority Scan ChannelPlease follow these guidelines for channel use in Australia UHF CB Channels & FrequenciesCtcss & DCS Code List Uniden UH064SX-2 UHF CB Transceiver Radio WarrantyUniden Australia Pty Limited/Uniden New Zealand Limited