Uniden UH044SX manual Getting Started, Battery Installation

Page 8

UNIDEN Model uh044sx UHF CB Radio

GETTING STARTED

BATTERY INSTALLATION

Your uh044sx pack includes 3 AA rechargeable NiMH batteries to power the uh044sx. You must install and then charge the batteries for 14+ hrs before use.

The uh044sx can also use 3 AA Alkaline batteries.

Do not mix old and new batteries to avoid damage to the unit.

To install the batteries:

1. Make sure your radio is off.

2. Release the battery cover clip, then remove the battery cover.

3. Insert 3 AA rechargeable NiMH batteries according to the polarity symbols inside the battery compartment.

4. Align the battery cover tabs with the uh044sx tab holes then replace the cover.

7

Image 8
Contents UH044SX Uniden Model uh044sx UHF CB Radio Contents Features IntroductionControls & Indicators Controls & Indicators Optional Accessories Included in Your UH044SX PackBattery Installation Getting StartedCharging Batteries Battery Level Display LOW Battery Alert Power ON/OFF VolumeSetting the Squelch OperationSelecting a Channel To Transmit and ReceiveTo Operate in Duplex Mode Repeaters You can only activate Duplex on CH01-CH08Transmit Power Select ScanningExample. CH40 becomes active Group Scangs Mode Priority Channel Dual Watch MonitorCtcss VOX Call Tone Busy Channel Lockout KEY BeepBack Lighting Power SaveKeypad Lock UHF CB Channels & Frequencies Please follow these guidelines for channel use in AustraliaCtcss & DCS Code List Warranty Uniden UH044SX UHF CB Transceiver RadioUniden Australia Pty Limited/Uniden New Zealand Limited