Uniden UH044SX manual Dual Watch, Monitor

Page 19

UNIDEN Model uh044sx UHF CB Radio

OPERATION

Drop-out Delay

While scanning, the uh044sx stops at a busy channel and receives a signal. When the received signal is over, the unit will wait for 3 seconds for the return of the signal, otherwise, the radio resumes scanning.

DUAL WATCH

When Dual Watch function is active, PRI CH is watched every 1.5 seconds.

Press and hold to activate or deactivate Dual Watch.

DUAL

DUAL appears on the display when activated.

MONITOR

This feature enables users to listen in for weak signals on the current channel at the press of a button.

To use monitor,

!For brief listening, press.

!For continuous listening.

Press and hold for 1.5 sec. A two tone beep will be heard and the receiver circuit will stay open, letting in both the noise & weak signals.

!Display shows BUSY icons.

!To return to normal receive mode press or.

18

Image 19
Contents UH044SX Uniden Model uh044sx UHF CB Radio Contents Introduction FeaturesControls & Indicators Controls & Indicators Included in Your UH044SX Pack Optional AccessoriesGetting Started Battery InstallationCharging Batteries Battery Level Display LOW Battery Alert Operation Power ON/OFFVolume Setting the SquelchTo Transmit and Receive Selecting a ChannelYou can only activate Duplex on CH01-CH08 To Operate in Duplex Mode RepeatersScanning Transmit Power SelectExample. CH40 becomes active Group Scangs Mode Priority Channel Monitor Dual WatchCtcss VOX Call Tone KEY Beep Busy Channel LockoutKeypad Lock Power SaveBack Lighting Please follow these guidelines for channel use in Australia UHF CB Channels & FrequenciesCtcss & DCS Code List Uniden UH044SX UHF CB Transceiver Radio WarrantyUniden Australia Pty Limited/Uniden New Zealand Limited