Fisher & Paykel GW512, GW612, GW712, MW512, MW612 If Your Smart Drive Beeps for Help

If Your Smart Drive® Beeps for Help

LIDLOCK light is flashing.

Make sure the lid is closed.

Press START/PAUSE (refer to page 12).

If the symptom persists call your Fisher & Paykel Dealer or Authorised Service Centre.

First RINSE or SPIN light is flashing as well as the Spin Speed light.

Wash load is out of balance. Ensure the machine is stationary. Manually redistribute the load.

Check the machine is level (refer to page 5).

Single Beep Every Second and... Possible Solutions

Some lights are on but the pattern of lights is unfamiliar.

Turn your machine off at the wall,

Wait for 60 seconds and turn it back on.

Check the machine is level (Refer to Page 5).

Remove load and retry.

Put through a Deep Rinse and Spin.

If the fault re-occurs repeat Step 1.

If the machine still will not work call your Fisher & Paykel Dealer or Authorised Service Agent

to arrange service (refer to page 37).

Contents

Main Intelligence Working For You Contents Please Note: Unpacking Removing the Packaging Drain Hose To prevent syphoning: Inlet Hoses Cold supply only: Levelling To check if your machine is level: Water Supply CAUTION! Accessories and Spare Parts Hot N Safe Valves Available Are: Before You Do Your First Wash Using Your Excellence Washer A. Detergent GW712, GW612, GW512 C D F E Using Your Pride Washer A. Detergent MW612, MW512 C D E F Lidlock Wash Cycles and Options Default Settings Model Variations Wash Options and Advancing the Cycle To S elect the Wash Options Model The Wash Progress Lights To Advance the Wash Cycle Water Levels Manual Water Level Selection Auto Water Level Wash Options Saving Water Eco & Models Water Saver Model Only Wash Options Soak Nappy Sanitisers/ Bleach Spin Hold Delay Start Wash Options Washing Bulky Items Washing Woollens Favourite Cycle Favourite Cycle To S et Your Favourite Cycle To U se Your Favourite Cycle Customising the Wash Cycles To C ustomise a Cycle Before You Wash Sorting Loading Detergent Choosing The Right Detergent How Much Detergent? Adding the Detergent Tablets: Fabric Softener How the Fabric Softener is Dispensed How Much Fabric Softener? Cleaning the Dispenser Scrud Option Adjustment Mode To Enter Option Adjustment Mode Page Wash Temperatures Rinse Options Controlled Cold End of Cycle Beeps Water Saver Auto Water Fill Level Light on Option Out-of-Balance Recovery Routine Automatic Recovery Option Machine Stops Option Specifications Model Capacity Depth Width Height* Height (Lid Open) When You Have Finished Cold Water Washing Cleaning Your Smart Drive Cleaning the Inside of Your Smart Drive Products That Might Damage Your Smart Drive Smart Drive Sounds and Beeps Automatic Lint System Water Consumption Litres Per Cycle Saving Water Recycling the Wash Water Models Only Recycling the Water From Deep Rinse Saving Water Manual Suds Save With Syphon Back If Your Smart Drive Beeps for Help Musical Series of Beeps* Every 5 Seconds and... Possible Solutions HOT water temperature light is flashing. COLD water temperature light is flashing. HOT and COLD water temperature lights are flashing. If Your Smart Drive Beeps for Help LIDLOCK light is flashing. First RINSE or SPIN light is flashing as well as the Spin Speed light. Single Beep Every Second and... Possible Solutions Some lights are on but the pattern of lights is unfamiliar. Operating Problems Wash Problems Listed below are possible causes and solutions to some common wash problems. Creasing. Poor Soil Removal. Linting. Customer care In New Zealand If You Need Assistance...* If you need service...* In Australia If You Need Assistance...* If you need service...* Manufacturers Warranty Fisher & Paykel Undertakes To This Warranty Does Not Cover Note:

Fisher & Paykel If Your Smart Drive Beeps for Help

Models: GW512 GW612 GW712 MW512 MW612