20
Customising the Wash Cycles

To C ustomise a Cycle

Model Only
You can program your Smart Drive® to remember the wash options you prefer for each wash
cycle. For instance, you may want to set the Regular cycle to a cold wash or set Heavy Duty to
include a soak.
1
Press POWER.
2
Press the wash cycle button. Hold down for 2 seconds.
You will hear 2 quick beeps and the wash cycle light will flash.
3
Select your wash options, (eg cold wash, soak).
4
Press the wash cycle again to store your customised cycle.
To change your customised wash cycle simply repeat these steps.
When you are customising a wash cycle you can shorten or lengthen the agitation time.
To shorten the agitation time, press ADVANCE to reduce the number of wash progress lights.
To increase the agitation time keep pressing ADVANCE until all the wash progress lights are on
(See page 14).
Note:
Unlike the Favourite cycle you cannot customise a wash cycle to start at the rinse or spin stage.
On Heavy Duty and Wool you can only decrease the wash time.