Fisher & Paykel GW512, GW612, GW712, MW512, MW612 Saving Water

31

Saving Water

Full loads are more efficient than part loads.

Use the Water Saver or Eco option. (Refer to page 16).

Adjust the rinse option on Regular, Heavy Duty and Wool cycles

to one deep rinse. (Refer to page 26).

Adjust Auto Water Level to fill with less water. (Refer to page 27).

Recycling the Wash Water

Models Only

Your Smart Drive® also offers several ways of reusing the wash and rinse water.

1

Select SOAK on the first wash cycle.

2

Remove the clothes at the end of the wash phase and add the second load to the wash water.

3

Select the wash cycle for the second load. You may need to add extra detergent.

4

Remove the second load at the end of the cycle.

5

Replace the first load, select rinse and complete the cycle.

Recycling the Water From Deep Rinse

1

Select SPIN HOLD on the first wash cycle. (You cannot use the Water Saver or Eco option when

recycling the water from deep rinse).

2

Remove the clothes at the end of the rinse and add the second load to the rinse water.

3

Select the wash cycle for the second load.

4

Remove the second load at the end of the cycle.

5

Replace the first load and spin dry.

Contents

Main Intelligence Working For You Contents Please Note: Unpacking Removing the Packaging Drain Hose To prevent syphoning: Inlet Hoses Cold supply only: Levelling To check if your machine is level: Water Supply CAUTION! Accessories and Spare Parts Hot N Safe Valves Available Are: Before You Do Your First Wash Using Your Excellence Washer A. Detergent GW712, GW612, GW512 C D F E Using Your Pride Washer A. Detergent MW612, MW512 C D E F Lidlock Wash Cycles and Options Default Settings Model Variations Wash Options and Advancing the Cycle To S elect the Wash Options Model The Wash Progress Lights To Advance the Wash Cycle Water Levels Manual Water Level Selection Auto Water Level Wash Options Saving Water Eco & Models Water Saver Model Only Wash Options Soak Nappy Sanitisers/ Bleach Spin Hold Delay Start Wash Options Washing Bulky Items Washing Woollens Favourite Cycle Favourite Cycle To S et Your Favourite Cycle To U se Your Favourite Cycle Customising the Wash Cycles To C ustomise a Cycle Before You Wash Sorting Loading Detergent Choosing The Right Detergent How Much Detergent? Adding the Detergent Tablets: Fabric Softener How the Fabric Softener is Dispensed How Much Fabric Softener? Cleaning the Dispenser Scrud Option Adjustment Mode To Enter Option Adjustment Mode Page Wash Temperatures Rinse Options Controlled Cold End of Cycle Beeps Water Saver Auto Water Fill Level Light on Option Out-of-Balance Recovery Routine Automatic Recovery Option Machine Stops Option Specifications Model Capacity Depth Width Height* Height (Lid Open) When You Have Finished Cold Water Washing Cleaning Your Smart Drive Cleaning the Inside of Your Smart Drive Products That Might Damage Your Smart Drive Smart Drive Sounds and Beeps Automatic Lint System Water Consumption Litres Per Cycle Saving Water Recycling the Wash Water Models Only Recycling the Water From Deep Rinse Saving Water Manual Suds Save With Syphon Back If Your Smart Drive Beeps for Help Musical Series of Beeps* Every 5 Seconds and... Possible Solutions HOT water temperature light is flashing. COLD water temperature light is flashing. HOT and COLD water temperature lights are flashing. If Your Smart Drive Beeps for Help LIDLOCK light is flashing. First RINSE or SPIN light is flashing as well as the Spin Speed light. Single Beep Every Second and... Possible Solutions Some lights are on but the pattern of lights is unfamiliar. Operating Problems Wash Problems Listed below are possible causes and solutions to some common wash problems. Creasing. Poor Soil Removal. Linting. Customer care In New Zealand If You Need Assistance...* If you need service...* In Australia If You Need Assistance...* If you need service...* Manufacturers Warranty Fisher & Paykel Undertakes To This Warranty Does Not Cover Note: