On the DECT1820 handset you want to register

On the DECT1820 handset you want to register:

1. Press menu/ok to access the main menu.

2. Press up or down key until "Add.Settings" is displayed and

press menu/ok .

Press up or down key to display "Register" and press menu/ok

.Press up or down key to select your base number and press menu/ok .

On your original base:

Press and hold find handset for approx. 3 seconds until you hear the registration tone. You are now in ‘registration mode’.

If the base already has the maximum number of handsets (6) registered to it you will need to de-register one of the existing handsets before you can register the new handset.

See section below for de-registering handsets.

On the DECT1820 handset:

Enter the base PIN code. Pre-set base PIN code is 0000. You will hear a confirmation tone when registration is complete.

When in standby mode, the new handset number will be displayed. The handset will automatically be allocated with the next available handset number.

If registration is unsuccessful, the display will show Not Registered and you will need to follow the registration procedure again.

[4]