STORINGA PHONENUMBERIN MEMORY
1.Make surethe handset is in standbymode (In Use lightis OFF).
2.Press the Memory button on the handset.(the In Use light will begin flashing
3.Enter the phone number,up to 16digits
4.Press Memory again
5.Enter the two digitmemory locationnmber (01-
20) on the keypad(the In Use lightwill stopflashing and you willhear two conflfmationbeeps.
6.Repeatthese stepsto storeadditionalphone numbers.
....-
lIIal"'l a-a
I
The pause button counts as one digit. Pressing
Redial/Pause more
than once increases the
length of pause between
numbers.
PAUSEFUNCTION
In some cases, such as PABX or long distance service, a pause may be needed in the
dialling sequence. Pressing the Redial/Pause button on the handset inserts a
2 second delaybetween dialled numbers. Pause(s)can be inserted into the programmed dialling sequence in memory locations.
DIALLINGA. NUMBERIN.MEMORY
1.Press Talk/End
2.Press Memory
3.Enter the two digit memory location number
CHANGING A STORED NUMBER FROM MEMORY
Follow the steps in the section Storing a Phone Number in Memory. The new phone number will automatically replace the previous one.
15