Uniden DS70 manual Callwaiting, For New Zealand Version Sing the Call Wait feature

AUSTRALIA

The Call Wait + 2 call waiting

procedure toggles between the

incoming and original call (and visa versa).

The Call Wait + 1 procedure will drop the current call

connection and pick up the

incoming call on hold.

NEW ZEALAND

You need to subscibe to

Te1ecom's Call Waiting

Service before you can use this

feature.

14

CALLWAITING

T For Australian Version

Using the Call Wait feature

If the Call Waiting tone sounds, press Call Wait then 2 to accept the waiting call (Aust only).

-GR-

To return to the original caller press Call Wait then 1 (Austonly).

T For New Zealand Version

U sing the Call Wait feature

If the Call Waiting tone sounds during a call, press Call Wait to toggle between the incoming call and the original call.

PAGE

To locate the handset press Page on the Base Unit The handset beeps for about 15 seconds.

c:J

0"""

0"""

TRAVELLING OUT OF RANGE \

/"

As you begin to move too far from the base, you will first hear a clicking sound. As you travel further, the noise increases. If you travel

out of range, your call terminates.

PABX CONNECTION

The DS70 telephone may work with a 2-wire Analogue PABX network. However,with the DS70hook-flashtimingfixed at lOOms(NZ 600ms), some PABX equipment that uses a different hook flash timing may have its special feature (i.e. placing a call on hold or transferring a call) inaccessible.