Uniden D2998-4, D2998-5, D2998-3 Set Up the Accessory Handsets, Install and Charge the Battery

Page 5

Set Up the Accessory Handset(s)

Install and Charge the Battery

1. Unpack all handsets, battery packs, and battery covers.

If any handset has the battery cover already attached, press in on the notch and slide the cover down and off.

2. Line up the battery pack connector with

the jack inside the handset. (The battery connector will only fit one way.)

3. Push the battery pack connector in until it

clicks into place. Tug gently on the wires to make sure the battery pack is securely connected.

4. Place the batter cover and slide it up into place.

5. Use an AC adapter to connect the power jack on each charger to a regular indoor (120V AC) power outlet.

6. Place each handset in a charger with the display facing forward. If the charge light on the charger doesn’t light up, reseat the handset or connect the charger to a different outlet.

##Charge all handsets completely (about 15 hours) before using them.

Test the Connection

Pick up each handset and press Talk/end. You should hear a dial tone, and the display should say Talk. (Press Talk/end again to hang up.)

If there is noise or static, see p. 22 for tips on avoiding interference.

English - 5

Image 5

Contents You will also find D2998 Series Users GuideIf you purchased You should Model number HaveWhats in the manual? Important Safety InstructionsImportant Information EnglishGetting Started Set Up the BaseAttach the Stand Remove the StandTest the Connection Connect the Power and Telephone CordsChanging from Tone to Pulse Dialing TryInstall and Charge the Battery Set Up the Accessory HandsetsParts of the Base Getting to Know Your PhoneKey icon What it does XxIn standby delete all messagesCommon Operation Keys Flash/exit Parts of the HandsetSpeaker Clear/intercomOn the base On the handset Reading the DisplaysIcon What it means Icons you might see only on the baseUsing the handset menus Using the MenusUsing the base menus Menu Option What it does BaseMenu Option What it does Entering Text on Your PhonePress ClearUsing Caller ID and Call Waiting Using Your PhoneChanging the Volume Caller ID list Redial listDeleting All Numbers in the CID List on This Station Using the PhonebookUsing Call Waiting Using Text-To-Speech Using Special FeaturesAdding Phonebook Entries Copying/Deleting All the Phonebook EntriesUsing the Audio Boost Adjusting the Base Visual RingerSilent Mode Using Multi-Station FeaturesCall Transfer Using Privacy ModeIntercom From the base From a cordless handsetUsing an Optional Headset Using Voice Message NotificationUsing Your Phone During a Power Failure Finding a Lost HandsetAccessing the Answering System Using the Answering SystemAnswering System Options Ans. Setup Delete Your Greeting Switch Between GreetingsRecording Your Personal Greeting Screening Your Calls Getting Your MessagesFrom the base From a handset Press Play/stopProgramming a Security Code Using the System While Youre Away from HomeDialing in to Your System ##Remember to make a note of your new security codeGeneral problems Possible solutions Solving ProblemsAudio issues Possible solutions Caller ID problems Possible solutionsMulti-station problems Possible solutions Installing a Line Filter or DSL FilterAnswering system problems Possible solutions XxSee if Record Time is set to Announce OnlyLiquid Damage Resetting StationsRegistering a Handset AC adapter Base Charger Battery pack with normal useFCC Part 15 Information One-year Limited Warranty Registered mark