REMOTE OPERATION
REMOTE OPERATION
You can operate the DTAM from any remote location using a
Call your telephone
When you hear the OGM, enter your security code. After a long beep, enter your remote command code(s).
If you do not hear an OGM, the unit is either in
Remote Answer-on
•Call your telephone (After 15 rings you will hear "Answer Off")
•Enter your remote security code within 8 seconds. (The DTAM beeps to confirm valid code)
•Enter 0 1 for OGM1 or 0 2 for OGM2 (Announce only)
•The DTAM announces "Answer On’, Then plays your selected OGM.
REMOTE OPERATION
NOTE: • An outgoing message must be recorded before you can remotely 
set the DTAM to answer calls.
•If you do not enter each digit of the security code within 8 seconds, the DTAM hangs up. If the DTAM is set to
32 | 33 |