Kenwood UBZ-GR14 INSTALLING/ Removing the Belt Hook, INSTALLING/ Removing the Stereo Headphones

ENGLISH

INSTALLING/ REMOVING THE BELT HOOK

1Align the belt hook tabs with the guides on the rear of the transceiver.

2Slide the belt hook down the guides until it locks in place.

3To remove the belt hook, pull back on the lever on the top of the belt hook and slide the belt hook out of the guides.

INSTALLING/ REMOVING THE STEREO HEADPHONES

Note: Always switch OFF the transceiver power when installing or removing the headphones.

1 Open the SP tab on the top of the transceiver.

2 Insert the headphone plug into the SP jack.

3 When you remove the head-phones from the transceiver, be sure to cover the SP jack with

the attached tab in order to keep dust and dirt away from the contacts.

4

UBZ-GR14 E 1-20 4 01.4.12, 9:35 AM