ENGLISH
1Press the MODE key momentarily, two times.
•The FRS and SUB icons blink.
2Press the ▲ or ▼ key to increase or decrease the code number of the selected channel.
•Press and hold the ▲ or ▼ key to continuously increase or decrease the code number until you release the key.
3Once you have selected your desired code number
(01 ~ 38 or OF), press the PTT switch to complete the selection and return to normal operation.
4Make sure your other party members are using the same code that you have set up.
•If each party member is using a different code, you will not be able to hear each other’s calls.
3MAKING A CALL
1When you want to make a call on your selected channel, first press the M key to alert the other party that you are about to make a call.
•The transmission indicator and CALL icon appear.
•This step is not necessary when you are responding to a call, as the other party is already expecting a response.
2 Press and hold the PTT switch, hold the transceiver about 3 inches (7 1/2 cm) from your mouth, then speak into the microphone using your normal voice.
• The transmission indicator appears while you are transmitting.
3 When you finish speaking, release the PTT switch.
Note: If you do not release the PTT switch after you finish talking, you will not be able to receive any calls. Additionally, pressing the PTT switch for extended periods will reduce the battery power.
8
8 | 01.4.12, 9:35 AM |