ADVANCED FEATURES
3.Press and release the MODE button again. The Memory icon and the main channel number will flash.
4.Select the main channel you wish to store by pushing the CHANNEL SELECT button up or down.
5.Press the MODE button again to store the main channel in memory and move to privacy code selection. The privacy code number begins flashing and the Memory icon continues to flash.
6.Select the privacy code
7.Press the TALK button to transmit on your selected channel and privacy code, which will be stored into the memory location you are using.
8.Press and release the ENTER button to return to Standby mode at your new memory location, or press and release the MODE button to save the memory location and proceed to other functions.
Recalling Memory Locations
To recall a channel you have stored in a memory location:
1.Press the MODE button
until the Memory icon and a memory location flashes.
2. Select your desired
memory location by pushing the CHANNEL SELECT button
up or down. Your radio will stay at this memory location until you exit Memory Function mode by pressing the ENTER button.
3.Repeat step 2 to recall other memory locations.
Using the Scan Function
To scan main channels:
1.Press the MODE button until the Scan icon and main channel number flashes.
2.Push the CHANNEL SELECT button up or down and the unit will begin scanning the main channels. (NOTE: The unit “ignores” privacy codes while scanning main channels.)
3.The radio will continue to scan all main channels and stop if an incoming transmission is detected. The unit will remain on that channel for 10 seconds. During that time you can:
a) Press and hold the TALK button and talk. The radio will remain on that channel and return to Standby mode.
b) Push the CHANNEL SELECT button up or down to resume scanning main channels.
c) Press the MODE button to proceed to privacy code scanning. (See below.)
If you do not press any button within 10 seconds, the radio will automatically resume scanning main channels.
To scan privacy codes:
1.While in Standby mode, press the CHANNEL SELECT button up or down to choose the main channel you wish to scan.
2.Press the MODE button until the Scan icon and the privacy code number flashes.
Your microTALK® radio can automatically scan main channels
3.Push the CHANNEL SELECT button up or down and the unit will begin scanning privacy codes within the main channel you selected.