OPERATION
External Speaker/Microphone Jack
Your microTALK® radio can be fitted with an external speaker/microphone (not included), freeing your hands for other tasks. See Accessories for optional accessories. To attach the external speaker/microphone:
1.Open the SPKR/MIC tab on top of the unit.
2.Insert the plug into the SPKR/MIC jack.
external speaker/ microphone
SPEAKER/ 
MICROPHONE jack
Using the MODE button
The MODE button allows | MODE |
you to use and program | |
the various functions of | button |
your microTALK® radio. If |
|
you press and hold the |
|
MODE button, the LCD will |
|
cycle through the different functions.
Using VOX Mode
In VOX mode, your microTALK® can be used
1.Press the MODE button until the VOX icon flashes and the current setting (“on” or “off”) is displayed.
2.Push the CHANNEL SELECT button up or down to turn VOX mode on or off.
ADVANCED FEATURES
3.Press and release the ENTER button to enter the new setting, or press the MODE button to enter the new setting and proceed to other functions.
ENTER |
button |
Setting the VOX Sensitivity Level
You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise. To set the sensitivity:
1.Press the MODE button
until the VOX icon flashes and the number for the current sensitivity level is displayed next to the letter L (level 5 = most sensitive, level 1 = least sensitive).
2.Push the CHANNEL SELECT button up or down to change the setting.
3.Press and release the ENTER button to enter the new setting, or press the MODE button to enter the new setting and proceed to other functions.
Programming Memory Locations
Your microTALK® radio has 10 memory locations
1.Push the MODE button until the Memory icon and the memory location flashes.
2.Select the memory location you wish to change by pushing the CHANNEL SELECT button up or down.