ADVANCED FEATURES
2. Press the MODE button until the Dual Watch icon flashes.
3. Push the CHANNEL SELECT button up or down to select the second channel you wish to monitor.
4.Press the MODE button. The privacy code flashes.
5.Push the CHANNEL SELECT button up or down to select the second privacy code.
6.Press and release the ENTER button to store the second channel/privacy code and engage Dual Watch.
7.To terminate Dual Watch and return to normal Standby mode, press and release the ENTER or TALK button.
Turning Roger Beep Off and On
With Roger Beep turned on, your listener will hear an audible tone when you release the TALK button. To change Roger Beep mode:
1.Press the MODE button until the Roger Beep icon
flashes and the current setting (“on” or “off”) is displayed.
2. Push the CHANNEL SELECT button up or down to turn Roger Beep on or off.
3.Press and release the ENTER button to enter the new setting, or press the MODE button to enter the new setting and proceed to other functions.
Turning Keystroke Tones Off and On
With Keystroke Tones turned on, your unit will sound beeps each time you press a button or change a setting. To change Keystroke Tones mode:
1. Press and hold the ENTER button for 5 seconds
to turn keystroke tones off. A double beep will sound and the Beep icon will disappear.
2.To turn keystroke tones back on, press and hold
the ENTER button for 5 seconds again. A double beep will sound and the Beep icon will appear. (NOTE: The unit must not
be in Lock mode during these steps.)
Changing Call Tone Settings
You can choose from five different call tone settings to alert you when someone is calling. To select a call tone setting:
1.With the power turned off, press and hold the CALL button as you turn the power on. The number of the current call tone setting will flash and the tone will sound for one second.
2.Push the CHANNEL SELECT button up or down to hear the other call tone settings.
3.With the number of your desired call tone setting displayed, press and release the TALK button or ENTER button. Your selection will be entered.
4.If no buttons are pushed for 15 seconds, the unit will automatically enter the last call tone pattern that was displayed.
Intercom
With the optional intercom adapter and two external speaker/microphone attachments, a single microTALK® radio can be used as an intercom system. (Ideal for motorcyclists.)