Operation
Using Your Radio
|
|
|
|
|
|
| Introduction | Operation | Customer Assistance | Warranty |
|
Mode Button
VOX Icon
Channel Button
VOX Sensitivity Level
Voice Activated Transmit (VOX)
•
In VOX Mode, your microTALK® radio can be used
To Turn VOX Mode On or Off:
1.Press the Mode button until the VOX icon flashes on the LCD. The current On or Off setting is displayed.
2.Press the Channel Up or Channel Down button to turn VOX On or Off.
3.a. Press the Mode button to enter the selected On or Off setting and proceed to other functions.
b. Press the Lock button to enter the selected On or Off setting and return to Standby Mode.
To Set the Sensitivity:
1.Press the Mode button until the VOX icon flashes and the current sensitivity level is displayed.
The current sensitivity level is displayed with letters “LE” and a number 1 through 5, 5 being the most sensitive level and 1 being the least sensitive level.
2.Press the Channel Up or Channel Down button to change the setting.
3.a. Press the Mode button to enter the selected setting and proceed to other functions.
b.Press the Lock button to enter the selected setting and return to Standby Mode.
Mode Button
Scanning Channels
Channel Button
Scan | • |
Your microTALK® radio can automatically scan |
main channels (1 through 22) or the privacy codes (00 through 38) within one (1) main channel.
To Scan Main Channels:
1.Press the Mode button until the Scan icon and the main channel number flashes on the display.
2.Press the Channel Up or Channel Down button to begin scanning the main channels.
The radio ignores privacy codes while scanning main channels.
3.The Scan icon will continue to be displayed when scan is On. Your radio will continue to scan all main channels and stop if an incoming transmission is detected. Your radio will remain on that channel for ten (10) seconds. During this time, you can:
a.Press and hold the Talk button to communicate with others. Your radio will remain on that channel and return to Standby Mode.
b.Press the Channel Up or Channel Down button to resume scanning channels.
c.Press the Mode button to proceed to privacy code scanning (see page 12 for further details).
If you press the Talk button while scanning and not within ten (10) seconds of receiving transmission, you will transmit on the last channel you transmitted or received on.
If you do not press any button within ten
(10)seconds, your radio will automatically resume scanning main channels.
10 English
Nothing comes close to a Cobra™ 11