Operation
Channel Button
Select Channel
Mode Button
Scan Privacy Codes
Using Your Radio
To Scan Privacy Codes:
1.While in Standby Mode, press the Channel Up or Channel Down button to choose the main channel you wish to scan.
2.Press the Mode button until the Scan icon and the privacy code number flashes on the display.
3.Press the Channel Up or Channel Down button and your radio will begin scanning privacy codes within the main channel you selected.
4.The Scan icon will continue to be displayed when scan is On. Your radio will continue to scan privacy codes and stop as incoming transmission is detected. Your radio will remain on that channel and privacy code for ten (10) seconds. During this time, you can:
a.Press and hold the Talk button to communicate with others. Your radio will remain on that channel and privacy code and return to Standby Mode.
b.Press the Channel Up or Channel Down button to resume scanning privacy codes.
c.Press the Mode button to proceed to next available Mode function.
If you press the Talk button while scanning (see page 11 for further details) and not within ten (10) seconds of receiving transmission, you will transmit on the last channel you transmitted or received on.
If you do not press any button within ten
(10)seconds, your radio will automatically resume scanning privacy codes.
Introduction
Mode Button
VibrAlert® + Ring
VibrAlert® Only
Ring Only
Channel Button
Mode Button
Call Tone Setting
Channel Button
|
|
|
Operation | Customer Assistance | Warranty |
VibrAlert® and Call Tones
•
Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently, or both.
To Change Call Settings:
1.Press the Mode button until the Call Setting icon flashes on the LCD. The current setting (Vibrate + Ring, Vibrate Only, or Ring Only) is displayed.
2.Press the Channel Up or Channel Down button to change the call setting.
3.a. Press the Mode button to enter the new setting and proceed to other functions.
b.Press the Lock button to enter the new setting and return to Standby Mode.
10 Call Tone Settings
•
You can choose between ten (10) different call tone settings to transmit a unique call alert.
To Change a Call Tone Setting:
1.Press the Mode button until the letter “C” and the current call tone number (1 through
10)is displayed. The current call tone will sound for one (1) second.
2.Press the Channel Up or Channel Down button to hear the other call tone settings.
3.a. Press the Mode button to enter the new setting and proceed to other functions.
b. Press the Lock button to enter the new setting and return to Standby Mode.
12 English
Nothing comes close to a Cobra™ 13