LI4900WX.qxp 11/21/2006 2:19 PM Page 24
Mode Functions
Operation
10 Call Tone Settings
•
You can choose from 10 different call tone settings to transmit a unique call alert.
Introduction | Operation | Customer Assistance Warranty |
Keystroke Tones
•
With Keystroke Tones turned on, your radio will sound beeps each time you press a button or change a setting.
Mode Button
Call Tone Setting
Channel Buttons
To change a call tone setting:
1.Press the Mode button until the
letter “C” and the current call tone number (01 through 10) is displayed.
2.Press the Channel Up or Channel Down button to hear the other call tone settings.
3.Choose one of the following:
a.Press the Mode button to enter the new setting and proceed to other functions.
b.Press the Lock/Enter button to enter the new setting and return to Standby mode.
Mode Button
Keystroke Tones On
Channel Buttons
To change keystroke tones:
1.Press the Mode button until the Keystroke Tones icon flashes on the display. The current on or off setting is displayed.
2.Press the Channel Up or Channel Down button to turn keystroke tones on or off.
3.Choose one of the following:
a.Press the Mode button to enter the new setting and return to Standby mode.
b.Press the Lock/Enter button to enter the new setting and return to Standby mode.
Roger Beep Confirmation Tone
•
Roger Beep is an audible tone that your listener will hear when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak.
Mode Button
Roger Beep On
Channel Buttons
To turn roger beep on or off:
1.Press the Mode button until the
Roger Beep icon flashes on the display. The current on or off setting is displayed.
2.Press the Channel Up or Channel Down button to select roger beep on or off.
3.Choose one of the following:
a.Press the Mode button to enter
the new setting and proceed to other functions.
b.Press the Lock/Enter button to enter the new setting and return to Standby mode.
24 | 25 |